NOAA Latest Topicshttps://forum.universal-devices.com/forum/284-noaa/NOAA Latest TopicsenNOAA Alert Issuehttps://forum.universal-devices.com/topic/45122-noaa-alert-issue/

Had a severe thunderstorm watch and warning.  Neither showed up.  
watch is still in effect for 3 more hours. 
 

My zone is VAZ505

I tried a few others with active alerts and same issue.

So most likely they changed their format again

NOAA_5-3-2025_70932_PM.zip

]]>45122Sat, 03 May 2025 23:21:20 +0000Conditions string in notificationshttps://forum.universal-devices.com/topic/44949-conditions-string-in-notifications/ Hi,

How would I get the conditions string in a custom notification? I tried using ${sys.node.n009_controller.GV13}, but that just displays the condition ID. Is there a modifier that can be applied?

]]>44949Fri, 14 Mar 2025 22:20:56 +0000Alerts not clearinghttps://forum.universal-devices.com/topic/44618-alerts-not-clearing/ We had a winter storm watch.  Worked perfectly and programs ran.  That changed to warning.  Also worked perfectly.

Warning has expired for about 10 hours now.  But its not clearing on my end.

So it looks like it cleared fine when a new warning replaced it but NOT when the alert went back to NONE

I ran the URL that I see in logs (logs attached) and I can see it seems to have issue.

I restarted the nodeserver and it worked fine and Alert changed to none but I cant do that after every alert.

Can you please take a look?  Logs were in ERROR but changed to dubug and did Query a few times.  Logs are before the restart.  I just did one AFTER restart and added after restart to name

https://api.weather.gov/alerts.atom?zone[0]=VAC107&limit=500&active=1

 

correlationId "1953878"
parameterErrors  
0  
parameter "query.amp;limit"
message 'Query parameter "amp;limit" is not recognized'
1  
parameter "query.amp;active"
message 'Query parameter "amp;active" is not recognized'
title "Bad Request"
type "https://api.weather.gov/problems/BadRequest"
status 400
detail "Bad Request"
instance "https://api.weather.gov/requests/1953878"

NOAA_1-7-2025_103852_AM.zip NOAA_1-7-2025_103856_AM.zip NOAA_1-7-2025_104445_AM AFTER RESTART.zip

]]>44618Tue, 07 Jan 2025 15:45:56 +0000Weather Alert Update Failurehttps://forum.universal-devices.com/topic/43110-weather-alert-update-failure/ It worked a week ago.  Only thing I did this week is update the Python Interface which is reloading all the nodeservers.  Maybe that caused the issue.

But in the logs I see weather alert update failure.

We are in active warning until 5am tomorrow so good day to test but I do have minor surgery today so wont be able to look at anything until tonight.

Log in debug mode attachedf

NOAA_2-16-2024_100636_AM.zip

]]>43110Fri, 16 Feb 2024 15:07:02 +0000Can Dense Fog Advisory alerts be addedhttps://forum.universal-devices.com/topic/43037-can-dense-fog-advisory-alerts-be-added/ @bpwwerCan Dense Fog Advisory alerts be added to your plug-in? We've had several in the last few days and they aren't being presented in the plug-in.

Thank you!

]]>43037Thu, 01 Feb 2024 15:31:43 +0000IndentationErrorhttps://forum.universal-devices.com/topic/42937-indentationerror/ Just tried installing this NOAA plug-in on IoX 5.8.0 running on Polisy.  Log indicates errors when starting.  I followed the instructions in the GitHub repo listing at GitHub - BME-nodeservers/udi-noaa-poly: Polyglot V3 node server for NOAA weather data.  

My location is Castaic, CA. 
NOAA - National Weather Service - XML data feeds - Current Conditions notes a weather station to use is KLAX. 
NOAA's National Weather Service - California Watch/Warning RSS Feeds by Zone Forecast shows my zone as CAZ088 or CAZ288 (tried both, same error) 
NOAA's National Weather Service - California Watch/Warning RSS Feeds by County Forecast shows my county as CAC037 (tried both, same error) 

Any help would be appreciated.

NOAA debug - 20240120-1.log

]]>42937Sat, 20 Jan 2024 22:07:28 +0000Alertshttps://forum.universal-devices.com/topic/42855-alerts/ I have programs to send me notifications when we have a particular weather alert. We had a Winter Weather Alert yesterday and it was upgraded to a Blizzard Warning. It appeared that when an alert is upgraded, the old one is still there. Is this correct?

I ask because I got the notification when the Blizzard warning was issued, and I continued getting the Winter Storm Warning notification.

Here are my two notification programs.

 

If
        'Plug-Ins / NOAA Weather' Alert is Winter Storm Warning
 
Then
        Set 'Plug-Ins / Notification Controller / UD Mobile' Send Message Sound 'Small Resonant Alarm' Content 94 Notification ID (ID=94)
        $Winter_Storm_Warning  = 1
 
Else
        $Winter_Storm_Warning  = 0
 

If
        'Plug-Ins / NOAA Weather' Alert is Blizzard Warning
 
Then
        Set 'Plug-Ins / Notification Controller / UD Mobile' Send Message Sound 'Small Resonant Alarm' Content 96 Notification ID (ID=96)
        $Blizzard_Warning  = 1
 
Else
        $Blizzard_Warning  = 0
 

]]>42855Fri, 12 Jan 2024 20:11:14 +0000Alert Type in programs only shows up to Fhttps://forum.universal-devices.com/topic/42715-alert-type-in-programs-only-shows-up-to-f/ On EISY I am trying to write programs for Winter Storm Warning.

The Alert Type only goes through F. 

Maybe a limit to ISY.  If so could you Split up somehow Alert A-F. Alert G-M.  etc?

Screenshot attached. Confirmed on both PC and Mac,

 

 

Screenshot 2023-12-24 at 3.23.54 PM.PNG

]]>42715Sun, 24 Dec 2023 20:26:32 +0000Just installed, getting errorhttps://forum.universal-devices.com/topic/42788-just-installed-getting-error/ Not sure what the invalid token is . . .  I set both variables, and restarted.

Any help would be appreciated.  Thanks!

 

image.png.aa3b5920fcb9850c36cac59c0b1729f0.png

debug 5.log

]]>42788Wed, 03 Jan 2024 12:37:20 +0000NOAA Weather Updateshttps://forum.universal-devices.com/topic/42761-noaa-weather-updates/ The plugin is not receiving updates.  Deleted and reinstalled.  This plugin has been working correctly since installed in April.

debug.log

]]>42761Sat, 30 Dec 2023 21:35:41 +0000GVP Driverhttps://forum.universal-devices.com/topic/40844-gvp-driver/ Anyone know what the Driver GVP is reporting  but not included in the NOAA Documentation nor is it pulled into eisy.

Right now mine has a value of 30. Which really doesn't match anything logical. I'm hoping it has something to do with air quality but 30 would be an extreme value.

 

TRI0N

]]>40844Wed, 22 Mar 2023 06:40:08 +0000Bug in NOAAhttps://forum.universal-devices.com/topic/35373-bug-in-noaa/ Video attached.

We had a winter weather advisory upgraded to a winter storm warning.

So basically there are two warnings at the same time.

We also had a wind advisory but that never shows up in the video at all.

So two issues-  One is what if there are two advisories/warnings at the same time. 

Second what if one is upgraded.  The problem is they dont delete the old one so really the upgraded one overlaps the other and probably only way to know is the other is newer. 

So I would always display the most serious one unless you can display them all.

Ignore the error that pops up.  I hit query too many times in a row I think

]]>35373Sat, 12 Mar 2022 19:45:57 +0000