MrBillyd

I have been messing a few days with an 8 button KPL 2486D ver. 40 Should seem straight forward, but this Knewbe is confused. I want to use the bottom 4 buttons E,F, G, H. I would like H. to be all off including all lights on the keypad, Excluding H. Would like to keep it on to know all off sceen is in gauged. G. I would like to light up buttons G and A, load button. All lights in this group on other switches set to 80%,. The A. button load-control to 80%. If button A is pushed the load shuts off and A button light goes out. G button light goes out as sceen is no longer true. F. button same as G but all members of the sceen turn to 50%. E. button is the movie sceen. Control light A, and load on A shuts off, and 4 other members get shut off, while the remaining go to 25 %.. I have tried out these 4 sceens, and the function works from my laptop. Then I tried from the KPL and it does not function as I wanted them to. I tried mutual exclusive buttons, and I have been messing with the non-toggle Off (button H) and non-toggle On for other states. In the all off screen, I had the button set to non-toggle off, and all items listed as 0% power? I also made a program IR trigger and a 45 second delay before launching the All off. That part seems to work. But going back and forth between movie, and say 50% and 80% the sceen gets out of wack, and the button logic is a mess. I have waded through, loads of these links the past few days, if someone could point me to a link with a blow by blow instructions on all of this works, that would be nice. I am very green, Bill