MWoods329

Hey @Javi did you get a chance to try this out?

That's what I needed to hear. Thanks!

I started down this route, but ran into not knowing how to get a neutral line over on the right side.

Not all of the whites are tied together. That might be just my terrible drawing skills. The white from the 14/3 (left box, lower right set) goes to the switch.

Yes, I’ve set up a dozen virtual multi ways in the past. That’s not the question. The question is how to determine which wires are which?

I have this new (to me) house which for the most part seems to have updated wiring. This was great for the few rooms I've put my Insteon switches into up until I got to one room which has a ridiculous number of multi-way switches. This is my first.... So the kitchen light is a three way. One box (let's call it the right one) only has red, white, black, and ground. No neutral or any other leads. The other box (let's call it the left) has three sets of Romex coming into it. Only one of those contains three leads. I need to put a KPL into the right box and a regular Insteon switch into the left box (see my sloppy diagram). What things do i need to test for, or what do I need to determine in order to get a neutral off to the right box without adding any wires?

Factory reset and manually adding it worked. Thanks!

If I just use the path Link Management --> Start Linking, the linking process just times out. Log shows: Sat 09/02/2023 02:47:09 PM : Start Insteon Device Linking Mode Sat 09/02/2023 02:51:18 PM : Stop Insteon Device Linking Mode, Final processing to follow And then nothing. Device is never added to the eISY console. If I use the path Link Management --> New Insteon/A10/X10 Device, and enter the address of the device, it also times out but gives the error: "Cannot determine Insteon engine". Both the PLM and the i3 KPL are on the same circuit, a few feet apart. Any ideas where to start with this?

I’ve tried both. Same result.

The Zmatter hardware is the dongle connected to the eISY. It is the only device connected to the eISY. The Zooz hardware is the multichannel device sitting across the room that I'm trying to include in the Zmatter's network.

This is a Zooz 700 series. Yes, I have the Zmatter hardware, Zwave enabled and other Zwave devices already functioning. When I add a Zwave multichannel (even the same device) via the Admin console, this behavior does not happen. But when I add any Zwave multichannel device from the UD Mobile app, this happens.

Anyone else tried to add Zwave multichannel devices from UD Mobile? A bit of back story: a while ago I had an issue with adding Zwave locks from UD Mobile, but attributed it to being pretty far away from the Zmatter dongle. But just recently, I tried adding a multichannel zwave device that was hardwired and within several feet of the dongle and still had the same issue when adding from UD Mobile. The actual event: generally speaking, everything was looking like it worked from the UD Mobile app. I went to Admin --> Zwave --> Add and put the device in inclusion mode. But when I pulled up the IoX Launcher a few minutes later to see the new device, it was still busy adding. And it wasn't just adding the lone device I had attempted to include, it was re-adding the same device under multiple nodes. For the one device I tried to add the Zooz 700 Relay (https://www.amazon.com/gp/product/B096LLL1C6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) it had added over nine times and was still going. I tried to use the Zwave -> Advanced -> Stop adding but that didn't stop it. Eventually, only a reboot stopped it. I took a screenshot part of the way through and collected all of the logs just in case someone smarter than myself could tell me what was going on with that. ISY-Events-Log.v5.6.4__Wed 2023.08.16 09.37.49 PM.txt

But regarding the ES1 - I have it. It’s Zigbee. I was able to connect it over Zigbee with the ZMatter dongle (but the only thing it did was print an error log that it’s not compatible yet).

Oh damn. I didn’t realized they made that change in version 2.

Aqara Presence Sensor FP2 https://www.amazon.com/Aqara-Positioning-Multi-Person-Detection-Assistant/dp/B0BXWZMQJ3/ref=sr_1_1_sspa?crid=2WPBKDELB3DH5&keywords=mmwave+presence+sensor&qid=1691579971&sprefix=%2Caps%2C78&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 Linptech Presence Sensor ES1 https://www.amazon.com/Linptech-Presence-Automation-Compatible-Assistant/dp/B0C7C6L66J/ref=sr_1_4?crid=2WPBKDELB3DH5&keywords=mmwave%2Bpresence%2Bsensor&qid=1691579971&sprefix=%2Caps%2C78&sr=8-4&th=1

Thanks, but I gave up. I had increased the interview timeout, changed network speed, even set the lock up within inches of the Zmatter adapter. Nothing worked, so returned it and got a Yale Assure Lock 2 for about half the price and it worked flawlessly on the first try. Had to shuffle around where each lock is on the house so its less obnoxious to the wife, but I'll probably be liquidating the Schlage locks I have soon.

Can’t set user codes by hand. However, IoX does reflect lock/unlock. I think I might have to just bite the bullet and scrap all these Schlage locks.

Other post thing isn’t important. That’s why I made this post. I started to pull a “me also” on someone else’s and realized what I had started so…. New post. But anyway, the only reason I haven’t switched over to Yale is that all of the locks in the house match. That’s the way the wife wants it and I’m not about to drop > $1k to get all new hardware. Especially since we’re planning to move soon and may not even need that many locks for where we’re headed. I was just hoping some else had gone through something similar and had an idea.

I'm having trouble with a new Zwave lock. Well, actually two. Lock A: No longer accepts the programming code and does not respond to a factory reset (ie. still doesn't accept the factory programming code after a factory reset). Any ideas what I can do with this now? Schlage couldn't have been less helpful. After two months of cyber bullying though, they finally agreed to honor their warranty. Now, onto the replacement unit... Lock B. Was a royal pain to get added to the eISY. Many attempts later and it finally added all of the right channels to the same node at one time. (after 15+ tries). Anyway, Lock B will respond to a query of it, Lock B will lock and unlock on command from the eISY. However, it will not accept any parameters or new user codes. It says that it accepts them, then when you try to use the new user code that you just added the lock will not open for it. I'm hesitant to factory reset it, given my experience with Lock A. And of course, Schlage says they may have a replacement part in about a year (this replacement came from a third-party vendor that I had to locate on my own and that vendor has no more). So... ideas on how to force a BE469 ZP to accept a new user code?

They all mapped back to the same lock. Somehow it saw the channels separately and indicated the device was not multichannel. I DID eventually get this working however now, I cannot set any of the parameters on it. Can't set user codes or anything.

I just went through this mess myself. Ultimately, I believe the issue to be with the lock itself as I had three others that had no issues at all. Anyone else have a lock that added itself as 15 different nodes? (image shown are all the same lock, and there were more that popped up on their own after that).

Yeah, I increased to 25 and getting much better responsiveness from my Schlage Zwave Plus devices (all but the one, but that has a different issue).

I just wanted you guys at UD to know how much I appreciate all of effort that went into the ZMatter dongle. Finally got around to setting it up on my new eISY and couldn't be happier with the performance. I was able to pair battery powered Zwave locks at a distance of around 50 linear feet through walls and floors (after setting up a few hard wired devices first). Just phenomenal compared to the performance of the add-on board with the old ISY994.

Yes, three or four times. I just rebooted now and tried again - same problem.

Okay, here's what I got with that tail and trying to log in Jan 16 14:37:25 eisy daemon[3009]: 1/16/2023, 14:37:25 [pg3] ^[[31merror^[[39m: No code in error response Jan 16 14:37:25 eisy daemon[3009]: 1/16/2023, 14:37:25 [pg3] ^[[33mwarn^[[39m: I SY Response: [Try: 3] [00:21:b9:02:61:30] :: [401 - OK] :: 1.039307ms - http://1 27.0.0.1:8080/rest/profiles/ns/0/connection Jan 16 14:37:25 eisy daemon[3009]: 1/16/2023, 14:37:25 [pg3] ^[[31merror^[[39m: No code in error response Jan 16 14:37:25 eisy daemon[3009]: 1/16/2023, 14:37:25 [pg3] ^[[31merror^[[39m: ISY Response: [MAX TRIES EXCEEDED] [00:21:b9:02:61:30] :: [401 - OK] :: 0.829009 ms - http://127.0.0.1:8080/rest/profiles/ns/0/connection Jan 16 14:37:25 eisy daemon[3009]: 1/16/2023, 14:37:25 [pg3] ^[[31merror^[[39m: Error: GET http://127.0.0.1:8080/rest/profiles/ns/0/connection Failed :: 401 - O K Jan 16 14:37:25 eisy daemon[3009]: 1/16/2023, 14:37:25 [pg3] ^[[31merror^[[39m: getExistingNodeServers :: Error: Received no response from the ISY. Check your I SY IP Address Jan 16 14:37:25 eisy daemon[3009]: at Object.getExistingNodeServers (/var/po lyglot/node_modules/@universaldevices/pg3x/lib/modules/isy/system.js:93:13) Jan 16 14:37:25 eisy daemon[3009]: at async /var/polyglot/node_modules/@univ ersaldevices/pg3x/lib/services/isy.js:80:21 Jan 16 14:37:25 eisy daemon[3009]: at async Promise.allSettled (index 0) Jan 16 14:37:25 eisy daemon[3009]: 1/16/2023, 14:37:25 [pg3] ^[[33mwarn^[[39m: v erifyNodeServers (00:21:b9:02:61:30) :: ISY has no node servers installed, skipp ing Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: M aking reqeust to socket for /rest/pg3.auth.ns Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[31merror^[[39m: uncaughtException: connect ECONNREFUSED /tmp/udx2client261892 Jan 16 14:40:21 eisy kernel: sonewconn: pcb 0xfffff80008844100 (local:/tmp/udx2c lient261892): Listen queue overflow: 76 already in queue awaiting acceptance (1 occurrences) Jan 16 14:40:21 eisy daemon[3009]: Error: connect ECONNREFUSED /tmp/udx2client26 1892 Jan 16 14:40:21 eisy daemon[3009]: at PipeConnectWrap.afterConnect [as oncom plete] (node:net:1300:16) Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[31merror^[[39m: uncaughtException REPORT THIS!: Error: connect ECONNREFUSED /tmp/udx2client26189 2 Jan 16 14:40:21 eisy daemon[3009]: at PipeConnectWrap.afterConnect [as oncom plete] (node:net:1300:16) Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: C aught SIGTERM/SIGINT Shutting down. Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: S topping running node servers... Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: S tore Stopping Gracefully Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: R emoving ISY queues for 00:21:b9:02:61:30 Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: K oa HTTP Service: Stopping Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: M QTT Client Services Stopping Gracefully. Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: U DX Services Stopping Gracefully Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: D B Stopping Gracefully Jan 16 14:40:21 eisy daemon[3009]: 1/16/2023, 14:40:21 [pg3] ^[[32minfo^[[39m: P G3 shutdown complete with code: 0 Jan 16 14:40:36 eisy daemon[3009]: 1/16/2023, 14:40:36 [pg3] ^[[32minfo^[[39m: Starting PG3 version 3.1.18 Jan 16 14:40:36 eisy daemon[3009]: 1/16/2023, 14:40:36 [pg3] ^[[32minfo^[[39m: Using Workdir /var/polyglot/pg3/ Jan 16 14:40:36 eisy daemon[3009]: 1/16/2023, 14:40:36 [pg3] ^[[32minfo^[[39m: Starting sqlite database at /var/polyglot/pg3/pg3.db Jan 16 14:40:36 eisy daemon[3009]: 1/16/2023, 14:40:36 [pg3] ^[[32minfo^[[39m: Encryption key found ID: c988d8b4-31c6-44d6-9416-48a969d717ee. Database version 1 Jan 16 14:40:36 eisy daemon[3009]: 1/16/2023, 14:40:36 [pg3] ^[[32minfo^[[39m: Query IoX for platform UUID. Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Loaded globalsettings successfully. Database version 1 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: isy table: Loaded (1) successfully Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: ISY: 00:21:b9:02:61:30 5.5.3 127.0.0.1 2b43b97d-a0ed-4235-b40a-a6488def4e87 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: No node servers in database. Add one through the user interface to get started Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: store is up-to-date Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Forcing custom certificates to off Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Updated configuration with overrides Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Reading certs from filesystem (UDX). Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: UDX Services Starting Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Starting update check Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Started MQTT Client Service Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Creating ISY queues for 00:21:b9:02:61:30 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: HTTP Queue response "Queue Created Successfully," Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Starting event listeners Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Starting Store Poll Refresh timer Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Starting ISY verification. Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Query ISY description at http://127.0.0.1:8080/desc Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Query store database https://pg3store.isy.io/v2/list Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Koa HTTPS Interface Service: Started - Address: 0.0.0.0 Port: 3000 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking ISY's for installed node servers... Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[31merror^[[39m: No code in error response Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[33mwarn^[[39m: ISY Response: [Try: 1] [00:21:b9:02:61:30] :: [401 - OK] :: 3.133993ms - http://127.0.0.1:8080/rest/profiles/ns/0/connection Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[31merror^[[39m: No code in error response Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[33mwarn^[[39m: ISY Response: [Try: 2] [00:21:b9:02:61:30] :: [401 - OK] :: 1.440466ms - http://127.0.0.1:8080/rest/profiles/ns/0/connection Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[31merror^[[39m: No code in error response Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[33mwarn^[[39m: ISY Response: [Try: 3] [00:21:b9:02:61:30] :: [401 - OK] :: 1.216839ms - http://127.0.0.1:8080/rest/profiles/ns/0/connection Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[31merror^[[39m: No code in error response Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[31merror^[[39m: ISY Response: [MAX TRIES EXCEEDED] [00:21:b9:02:61:30] :: [401 - OK] :: 1.281375ms - http://127.0.0.1:8080/rest/profiles/ns/0/connection Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[31merror^[[39m: Error: GET http://127.0.0.1:8080/rest/profiles/ns/0/connection Failed :: 401 - OK Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[31merror^[[39m: getExistingNodeServers :: Error: Received no response from the ISY. Check your ISY IP Address Jan 16 14:40:37 eisy daemon[3009]: at Object.getExistingNodeServers (/var/polyglot/node_modules/@universaldevices/pg3x/lib/modules/isy/system.js:93:13) Jan 16 14:40:37 eisy daemon[3009]: at async /var/polyglot/node_modules/@universaldevices/pg3x/lib/services/isy.js:80:21 Jan 16 14:40:37 eisy daemon[3009]: at async Promise.allSettled (index 0) Jan 16 14:40:37 eisy daemon[3009]: at async Object.start (/var/polyglot/node_modules/@universaldevices/pg3x/lib/services/isy.js:26:5) Jan 16 14:40:37 eisy daemon[3009]: at async start (/var/polyglot/node_modules/@universaldevices/pg3x/bin/pg3.js:112:5) Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[33mwarn^[[39m: verifyNodeServers (00:21:b9:02:61:30) :: ISY has no node servers installed, skipping Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Reinstall Services Starting Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Waiting for store (false) and isy (false) before starting node servers. Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/ns/status/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/ns/command/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/ns/system/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/ns/custom/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/frontend/isy/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/frontend/system/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/frontend/ns/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: MQTTC: Subscribed to udi/pg3/connections/ns/# QoS 0 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Airscape Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in HusqvarnaMower Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Timedata Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in YoLink Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Sun Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in PurpleAir Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in UnifiProtect Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in WLED Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in AERISWeather Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Flair Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Airthings-C Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in August Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in HarmonyHub Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Roku Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in MiLight Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Sensibo Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in AVRemote Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in WeatherBit Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Virtual Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in NanoLeaf Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in NOAA Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in OnkyoAVR Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in LiFX Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in VirtualButtons Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in ST-Inventory Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in ATest Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in AMINEM Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Roomba Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in WeatherLink Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Russound Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in TeslaPW Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Rachio Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in ST-Nuheat Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Hue Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in UnifiPresence Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Holidays Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Sonos Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in iAquaLink Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Climacell Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in ST-Sonos Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Notification Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in WirelessTag Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Onkyo Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Volumio Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in WeatherPoly Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in EnvisaLink-HW Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Bond Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in BalboaSPA Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in HolidaysGoogle Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in OpenSprinkler Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in DavisWeather Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Twinkly Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in IFTTT-Webhooks Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Wemo Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in WeatherFlow Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Ping Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in TeslaEV Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in BASIRRIGATION Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Backup Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in DysonPureCool Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in AVServer Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in EnvisaLink-DSC Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Govee Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in OpenWeatherMap Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in BlueIris Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in MagicHome Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in RainMachine Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in MQTT Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in BASPOOL Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Acurite Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in MyQ Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in VenstarCT Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in iTach-IR Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Plex-WebHook Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in BASGARAGE Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in FlumeWater Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in VUE Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Caseta Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in ShellyRGBW2 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in ST-EcoWitt Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Blink Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Kasa Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Kaiterra Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in ELK Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Sense Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Somfy Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Netatmo-WS Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Ecobee Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in BASAO Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Wake-On-Lan Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Push Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Camect Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in SolarEdge Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Meteobridge Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in TotalConnect Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in MySmartBlinds Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in HueEmulator Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in Eagle-200 Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in AmbientWeather Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Checking for changes in HoneywellHome Jan 16 14:40:37 eisy daemon[3009]: 1/16/2023, 14:40:37 [pg3] ^[[32minfo^[[39m: Query store database https://pg3betastore.isy.io/v1/list Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: ***************************************** Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Latest PG3x version available is 3.1.19 Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: ***************************************** Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in DSC-IT100 Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Roku Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in PythonTemplate Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Example-1 Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Tuya-Devices Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in ATest Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Roomba Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in TestTeslaEV Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Example-2 Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Notification Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Example-4 Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in OpenSprinkler Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Example-3 Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in eISYIR Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in DysonPureCool Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Sensibo-Air Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in VueTest Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in MagicHome Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in iTach-IR Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Kasa Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in ELK Jan 16 14:40:38 eisy daemon[3009]: 1/16/2023, 14:40:38 [pg3] ^[[32minfo^[[39m: Checking for changes in Ecobee