avwuff

Thanks to everyone who posted information. My PLM has been acting up for months, and I didn't really think much of it. The other day I was linking a new device and the PLM refused to go into Link mode. I manually pressed the LINK button and heard a high-pitch whine noise come out of the PLM, so I knew it had to be something with the power supply. Googling found this thread! I ordered similar parts from Digi-key.ca, for all you Canadians, this is the site to use. Any order placed before 8pm will arrive before 11am the next day, for a shipping cost of $8 and no import duties or fees. Here's what you want to order: 1x 399-6538-ND ESG106M400AH4AA CAP ALUM 10UF 20% 400V RADIAL $0.95 1x 493-3276-ND UTT1E101MPD CAP ALUM 100UF 20% 25V RADIAL $0.99 2x 399-6599-ND ESK106M050AC3AA CAP ALUM 10UF 20% 50V RADIAL $0.23 1x 399-6597-ND ESK106M016AC3AA CAP ALUM 10UF 20% 16V RADIAL $0.20 Here's my V1.0 board with the finished repair: http://www.avbrand.com/personal/2413S-Repair.jpg Note that the v1.0 board seems to have an extra inductor wired in with the two 35V caps, where the board clearly specified only one. There's also an extra wire running to the rear of the board. I didn't add this wire, it came like this when I bought this module in 2011. It works great now! Thanks to everyone for their posts!