DeShark

They are all original 6 button KPLs. (2334-2) KeypadLinc Dimmer 5 Buttons v.45 Yes, the Chill scene works. I think that scene controls the load. Will have to verify.

That is correct

6 button KPLs.

Hello fellow wireheads. This is my first post. I have been experimenting with Insteon devices now for a few years and have multiple devices and an ISY 994i setup and working. The issue I am running into I this.. Let me setup the scene for you... I have 3 KPLs, one at each entrance to my kitchen, and have them all setup to operate the same scenes. There are two scenes.. for lack of better names.. I named them "All" and "Chill" to coincide with the button labels "A" and "C" respectively. Now.. KPL1 powers the kitchen floods, KPL2 powers the pantry floods, KPL3 powers the kitchen sink spots. The "All" scene turns everything on at 100%. The "Chill" scene turns everything on at 20%. The devices that both scenes control are the 3 devices the 3 KPLs power and the island pendants lights which are controlled by an InLineLinc Dimmer. My issue.. is that when I press the "A" button on KPL1.. everything turns on except the lights that KPL1 powers. When I press the "A" button on KPL2.. everything turns on except the lights that KPL2 powers. Etc. Now I have checked my configuration in the ISY and those lights that the various KPL power are setup as responders to the scenes. I have no idea why they don't act the same if they are all using the same scenes to control the various devices. What am I missing here?? Thanks, DeShark

I tried that. No change.

You mean like these? I already had them all set like this. https://www.dropbox.com/s/lpf5ldw21ozh5mo/Screenshot%202015-09-24%2016.57.40.png?dl=0 https://www.dropbox.com/s/lpf5ldw21ozh5mo/Screenshot%202015-09-24%2016.57.40.png?dl=0 https://www.dropbox.com/s/e26t9c8xkpsqult/Screenshot%202015-09-24%2016.56.33.png?dl=0 https://www.dropbox.com/s/e26t9c8xkpsqult/Screenshot%202015-09-24%2016.56.33.png?dl=0

I did the button groupings in the scenes. Two scenes.. "All" and "Chill". "All" turns all lights on. "Chill" turns most lights on at 50%. See screenshots of them both below: https://www.dropbox.com/s/x6qi18vd6ux14q4/Screenshot%202015-09-24%2015.33.52.png?dl=0 https://www.dropbox.com/s/yaj0k4lxifa9sgg/Screenshot%202015-09-24%2015.34.18.png?dl=0

I am trying to setup multiple keypadlinc devices to control the same set of scenes. I have configured button A to control sceneA on both keypadlincs and have configured button C to control sceneC on both keypadlincs. I have grouped buttons A and C to be mutually exclusive on both keypadlincs. Finally, I have configured the on levels of both keypadlincs button C to off when either button A is pressed. I have also configured the on levels of both keypadlincs button A to off when either button C is pressed. Ok, you got all that? Here is what is happening. Everything is working great with one exception. When you press either button A or C on one of the keypadlincs, both buttons A and C light up on the other keypadlinc. And of course it works the same from the other keypadlinc. Everything on the keypadlinc you are operating works fine. I am at a loss. Any ideas? All buttons are toggle mode as by default. Thanks in advance, DeShark