MemoryLeak
-
Posts
9 -
Joined
-
Last visited
MemoryLeak's Achievements
Newbie (1/6)
0
Reputation
-
Thanks everybody. The root issue was the dead transformer. After I've replaced it everything works fine.
-
ok. So the transformer is dead. Currently it's a VITEK VT24VAC20 Do I have to go with VITEK only? What are the alternatives? (couldn't find a store here, in Ontario, that sells VITEK products) Thanks!
-
There is a transformer and light is green on it. There is no rain sensor plugged in. Please see the photo.
-
There is NO wire connected to zone 8. There is "Zone 8: Pump" option.
-
ezflora was already installed master valve or pump - how do I check that? there are 7 zones where exactly in the Admin Console should I look? can't get the backup. can't contact the owner.
-
my understanding the valve is that when a zone is on, the actual valve would open, and it will rain
-
Ran a test, results below Wed 07/27/2016 05:14:02 PM : [GRP-RX ] 02 61 11 13 00 06 Wed 07/27/2016 05:14:03 PM : [CLEAN-UP-RPT] 02 58 06 Wed 07/27/2016 05:14:03 PM : [iNST-SRX ] 02 50 1E.79.65 41.E8.F8 65 13 11 LTOFFRR(11) Wed 07/27/2016 05:14:03 PM : [std-Cleanup Ack] 1E.79.65-->ISY/PLM Group=0, Max Hops=1, Hops Left=1 <html><font color="red">----- Outdoor lawn Test Results -----</font></html> <html><font color="red">[succeeded]</font> EzFlora - 8 (1E 79 65 8 )</html> <html><font color="red">[succeeded]</font> EzFlora - 7 (1E 79 65 7)</html> <html><font color="red">[succeeded]</font> EzFlora - 2 (1E 79 65 2)</html> <html><font color="red">[succeeded]</font> EzFlora (1E 79 65 1)</html> <html><font color="red">[succeeded]</font> EzFlora - 4 (1E 79 65 4)</html> <html><font color="red">[succeeded]</font> EzFlora - 3 (1E 79 65 3)</html> <html><font color="red">[succeeded]</font> EzFlora - 6 (1E 79 65 6)</html> <html><font color="red">[succeeded]</font> EzFlora - 5 (1E 79 65 5)</html> <html><font color="red">----- Outdoor lawn Test Results -----</font></html> Wed 07/27/2016 05:14:11 PM : [iNST-TX-I1 ] 02 62 00 00 11 CF 13 00 Wed 07/27/2016 05:14:11 PM : [iNST-ACK ] 02 62 00.00.11 CF 13 00 06 LTOFFRR(00)
-
Good day to everybody! Recently moved to new house. Previous owner had an ISY configured. Many devices configured to work with. But he took the ISY, as it was custom configured to his desires. Now, I'm trying to figure out all the things myself. The first device I tried to configure is EzFlora sprinkler controller. Steps I did: factory reset EzFlora linked EzFlora to ISY using "add insteon device by address" Now, I see 8 zones. But, when I try to open a zone nothing happens. Not sure where to start to troubleshoot the issue. Can you advise, please? Thanks!