CJVann Posted February 20, 2013 Share Posted February 20, 2013 I'm creating an event to "Display Text on Keypads", but the "Content" box is empty. Where does that data come from? I thought maybe the Elk Text set in Elk-RP, but it's not importing those messages. Thanks! Link to comment Share on other sites More sharing options...
Michel Kohanim Posted February 20, 2013 Share Posted February 20, 2013 Hello CJVann, What version of ISY firmware/UI are you on (Help | About)? Also, can you send (or attach) a screenshot? Email address: support@universal-devices.com . With kind regards, Michel Link to comment Share on other sites More sharing options...
apostolakisl Posted February 20, 2013 Share Posted February 20, 2013 Look under the tabs Configuration : Emails/Notifications : Customizations This is where you put the content. The name goes on the left (this is what shows in the program), and the content goes on the right (this is what shows on the keypad). Perhaps this isn't the same on all firmwares and that is why Michel is asking for that. I am running 3.3.10, but I don't recall it looking different on older firmwares. Link to comment Share on other sites More sharing options...
CJVann Posted February 23, 2013 Author Share Posted February 23, 2013 I am on ISY v 3.3.10 Yes, the Email/Notifications screen is where it is pulling the information from - THANK YOU! I was expecting it to pull the text from the Elk itself under "Automation, Texts" and I couldn't figure out how to import that data. Thanks again! Link to comment Share on other sites More sharing options...
CJVann Posted February 24, 2013 Author Share Posted February 24, 2013 I created a program such that if the garage door was open, it would display a message on-screen saying so. To erase this message when the door goes down, I just send a blank message, right? If so, I'm assuming only one message can be displayed before being bumped by another. So you must have to use messages very cautiously, otherwise messages such as a reminder that it's Trash Day will be erased by other messages such as "Mail has gone", or displaying the outdoor temperature. Appreciate guidance, system is down today while I'm painting (no keypads - ha). Link to comment Share on other sites More sharing options...
apostolakisl Posted February 26, 2013 Share Posted February 26, 2013 Yes. Use repeats to keep a message alive. You can have multiple messages as long as you stagger the start times then they will all come up. If On Mon Time is 6:25:00PM Then Send Notification to 'ellen gmail' content 'Trash Tuesday' Send Notification to 'ellen text' content 'Trash Tuesday' Repeat 420 times Wait 2 minutes Set Elk Area 'Main House' Display Text on Keypads, Content 'Trash Tuesday' Else - No Actions - (To add one, press 'Action') Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.