whywork Posted June 10, 2013 Posted June 10, 2013 Hi, After some weeks away, I returned to my ISY installation. RF COMMUNICATION Before I took a look at the wireless thermostat "non reporting" issues, I installed a new dual band switchlinc 2477D in a room approximately 50 feet from the wireless thermostat. I added the switchlinc to my ISY and just for fun, cold booted my ISY. MAGIC - (or something like magic) - It works; the Wireless Thermostat reported its complete status almost immediately to ISY. So - it seems like my wireless thermostat to ISY communication problems were related to poor RF communications all along. Thanks for all the help - LeeG in particular. (I never did examine the LEVEL 3 Insteon messages because everything is working well now).
LeeG Posted June 10, 2013 Posted June 10, 2013 whywork Thanks very much for taking the time to post back the results. Glad to hear it is working. It may help another user who has two 2441ZTH thermostats at v.0D firmware which are not reporting. With your v.0D working that would tend to eliminate the thermostat firmware.
jmed999 Posted June 10, 2013 Author Posted June 10, 2013 My firmware is v.0D but the hardware is v1.3. My stats will not go into master mode. The owners manual says it must be part of a scene to be put in master mode. Sent using my Galaxy S4 and Tapatalk!
Recommended Posts