musicmatters Posted August 14, 2013 Share Posted August 14, 2013 I was not able to control my devices through the mobi linc app. I noticed the green light was not turning on on my PLM, so I orders a new one and plugged it in. Now I can control most devices through the app, but only on the "devices" side, not on the "scenes" side. If I trigger a device on it will turn on, but if I do a scene nothing responds. Any ideas? Link to comment Share on other sites More sharing options...
LeeG Posted August 14, 2013 Share Posted August 14, 2013 Was the ISY powered Off when the new PLM was installed? Was a Restore Modem (PLM) command issued to build new PLM and change all device references from old PLM to new PLM? Link to comment Share on other sites More sharing options...
musicmatters Posted August 14, 2013 Author Share Posted August 14, 2013 Should the ISY be on or off when it's plugged in?q Link to comment Share on other sites More sharing options...
LeeG Posted August 14, 2013 Share Posted August 14, 2013 The ISY should be Off when the new PLM is plugged in. Then power the ISY. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.