jetfan101 Posted November 11, 2013 Posted November 11, 2013 I linked the switch to the sensor .have pin 3 and 5 jumped , but it will come on ring the day . I would only want the light on at night . This is outside flood light and the sensor is outside .Any help thanks.
LeeG Posted November 11, 2013 Posted November 11, 2013 When Jumper 5 is in place the Motion Sensor options are set by software. Jumper 3 has no affect. Put the Motion Sensor into linking mode to keep it awake. Click the Motion Sensor - Sensor node and click the Options button. Insure the Night Mode: option is unchecked. Also the Dark Sensitivity: number controls how dark it has to get to be in Night Mode. The smaller the number the darker it has to be to enter Night Mode.
Recommended Posts