raymondh Posted July 9, 2014 Share Posted July 9, 2014 I've installed a Schlage BE469NXCEN625 and the UD Z-Wave module. All firmware is the latest. From the UD interface, the lock responds 100% of the time. Mobilinc brought the lock in and it works 100% of the time if I open the settings menu on the lock icon and press lock/unlock. If I simply press on the icon it only toggles the lock about 25% of the time. I know I'm pressing it because I get the spinning wheel. Is the icon a toggle button or do I need to press on a certain location to get lock and a different location to get unlock? <---- now that I write that I know the response should be "try it" but I just left town and don't want to play with my lock remotely. Thanks! Link to comment Share on other sites More sharing options...
InsteonNut Posted July 10, 2014 Share Posted July 10, 2014 Hi raymondh, Yes, this is a known issue in MobiLinc/iOS 4.00.20 where the icon control and status is disconnected for Z-Wave deadbolts. It is fixed and will be in our 4.00.21 release. Wes Link to comment Share on other sites More sharing options...
InsteonNut Posted July 28, 2014 Share Posted July 28, 2014 Hi folks, Just FYI, this is fixed in 4.00.21 on the iOS app store. Wes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.