EZIO8 Comm issues

[ravedog]

Got you. By the way. None of this is using scenes other than the occasional KPL button as a responder to light up the led.

 

 

Sent from my iPhone using Tapatalk

[ravedog]

So do you think my workaround query program would be the solution here other than installing an iolinc as an input device? (Which I'm not going to do)

 

 

Sent from my iPhone using Tapatalk

[LeeG]

Communication from the EZIO8SA Inputs is done with Scene commands.   The ISY assigned Group/Scene numbers 9-F to Inputs 1-7.   Normally the EZIO8SA uses Group/Scene 1-7 for Inputs 1-7.   Does not change the fact that the EZIO8SA will use Scene commands, only what Group/Scene number the EZIO8SA uses.

 

Sun 09/07/2014 01:25:20 PM : [ 21 1F E2 4] ST 255 - RELAY 4 ON

 

Sun 09/07/2014 01:25:22 PM : [INST-SRX ] 02 50 21.1F.E2 00.00.0A C7 13 00 LTOFFRR(00) - INPUT 2 OFF- Group/Scene Broadcast message

Sun 09/07/2014 01:25:22 PM : [Std-Group ] 21.1F.E2-->Group=10, Max Hops=3, Hops Left=1
Sun 09/07/2014 01:25:22 PM : [D2D EVENT ] Event [21 1F E2 A] [DOF] [0] uom=0 prec=-1
Sun 09/07/2014 01:25:22 PM : [ 21 1F E2 A] DOF 0
Sun 09/07/2014 01:25:22 PM : [VAR 2 8 ] 298
Sun 09/07/2014 01:25:22 PM : [INST-SRX ] 02 50 21.1F.E2 2F.B8.09 41 13 0A LTOFFRR(0A) - INPUT 2 OFF-Group/Scene Cleanup Direct message 
Sun 09/07/2014 01:25:22 PM : [Std-Cleanup ] 21.1F.E2-->ISY/PLM Group=10, Max Hops=1, Hops Left=0
Sun 09/07/2014 01:25:22 PM : [INST-DUP ] Previous message ignored.

Edited September 8, 2014 by LeeG

[LeeG]

For low volume events the query should be okay.   With all the ICs available there might be a simple way to electronically delay the signal to the Input.  Been too many years since doing fabrication like that to suggest a particular IC.  

[ravedog]

Hmmm. What an interesting idea. One if the engineers at my work loves building stuff (it's scary whst he knows. ) I'll run it by him.

 

 

I'm about to move forward abd if dig up my programming. Do you think my comms are fairly ok so I can move on? Judging by what you been able to look at?

 

I can't thank you enough lee for all the help. Means a lot

 

 

Sent from my iPhone using Tapatalk

[LeeG]

I do not see comm failures in any of the traces.

[ravedog]

Well I have been playing with my programs and adding the query really hardened things up. Over the next week will hammer it and see if I managed to lick things. Thanks again lee.

 

 

Sent from my iPad using Tapatalk