rl1965 Posted September 13, 2014 Posted September 13, 2014 I recently purchased a KeypadLinc 2334-232 (6 Button, dual band). When I linc the KPL to ISY, MyISY identifies the KPL correctly, but only shows one line for the controller. It should show 5. How do I link the secondary buttons? Any help is greatly appreciated. Firmware: 3.3.10 UI: 4.2.10 Log from linking: Fri 09/12/2014 05:36:53 PM : Start Insteon Device Linking Mode Fri 09/12/2014 05:36:53 PM : [LNK-BGN ] 02 64 01 00 06 Fri 09/12/2014 05:37:01 PM : [LNK-STAT ] 02 53 M(01) gid=00 2F.EE.D7 0142 43 Fri 09/12/2014 05:37:01 PM : [2F.EE.D7 00] Linked device type=01.42 fw=43 Fri 09/12/2014 05:37:01 PM : [2F EE D7 0 ] Added to list of devices to link to ISY Fri 09/12/2014 05:37:01 PM : [LNK-BGN ] 02 64 01 00 06 Fri 09/12/2014 05:37:10 PM : Stop Insteon Device Linking Mode, Final processing to follow Fri 09/12/2014 05:37:10 PM : [LNK-END ] 02 65 06 : : Unexpected, ignored (65) Fri 09/12/2014 05:37:10 PM : [iNST-TX-I1 ] 02 62 2F EE D7 0F 0D 00 Fri 09/12/2014 05:37:10 PM : [iNST-ACK ] 02 62 2F.EE.D7 0F 0D 00 06 (00) Fri 09/12/2014 05:37:11 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 0D 02 (02) Fri 09/12/2014 05:37:11 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:11 PM : [2F EE D7 0 ] Calibrating engine version Fri 09/12/2014 05:37:11 PM : [iNST-TX-I2CS] 02 62 2F EE D7 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 Fri 09/12/2014 05:37:11 PM : [iNST-ACK ] 02 62 2F.EE.D7 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 06 (00) Fri 09/12/2014 05:37:12 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 2F 00 (00) Fri 09/12/2014 05:37:12 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:12 PM : [iNST-ERX ] 02 51 2F EE D7 2F BA B2 11 2F 00 00 01 0F FF 00 AA 00 2F BA B2 00 1E 01 5E Fri 09/12/2014 05:37:12 PM : [Ext-Direct ] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Fri 09/12/2014 05:37:13 PM : [2F EE D7 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0FF8) Fri 09/12/2014 05:37:13 PM : [2F EE D7 1 ] Start : Adding device to ISY Fri 09/12/2014 05:37:13 PM : [2F EE D7 1 ] Finish : Adding device to ISY was Successful Fri 09/12/2014 05:37:13 PM : [iNST-TX-I2CS] 02 62 2F EE D7 1F 2E 00 01 00 00 00 00 00 00 00 00 00 00 00 00 D1 Fri 09/12/2014 05:37:13 PM : [iNST-ACK ] 02 62 2F.EE.D7 1F 2E 00 01 00 00 00 00 00 00 00 00 00 00 00 00 D1 06 (00) Fri 09/12/2014 05:37:13 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 2E 00 (00) Fri 09/12/2014 05:37:13 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:14 PM : [iNST-ERX ] 02 51 2F EE D7 2F BA B2 11 2E 00 01 01 00 00 20 20 1E FF 05 3C C0 00 00 00 Fri 09/12/2014 05:37:14 PM : [Ext-Direct ] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Fri 09/12/2014 05:37:14 PM : [iNST-TX-I1 ] 02 62 2F EE D7 0F 19 00 Fri 09/12/2014 05:37:14 PM : [iNST-ACK ] 02 62 2F.EE.D7 0F 19 00 06 LTSREQ (LIGHT) Fri 09/12/2014 05:37:14 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 01 00 (00) Fri 09/12/2014 05:37:14 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:14 PM : [2F EE D7 0 ] Successfully added device Fri 09/12/2014 05:37:15 PM : [ 2F EE D7 1] OL 255 Fri 09/12/2014 05:37:15 PM : [ 2F EE D7 1] RR 30 Fri 09/12/2014 05:37:15 PM : [ 2F EE D7 1] ST 0 Fri 09/12/2014 05:37:15 PM : [ 2F EE D7 1] OL 255 Fri 09/12/2014 05:37:15 PM : [ 2F EE D7 1] RR 30 Fri 09/12/2014 05:37:15 PM : [iNST-TX-I2CS] 02 62 2F EE D7 1F 2F 00 00 02 0F FF 08 A2 00 2F BA B2 FF 1F 01 5D Fri 09/12/2014 05:37:15 PM : [iNST-ACK ] 02 62 2F.EE.D7 1F 2F 00 00 02 0F FF 08 A2 00 2F BA B2 FF 1F 01 5D 06 (00) Fri 09/12/2014 05:37:15 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 2F 00 (00) Fri 09/12/2014 05:37:15 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:15 PM : [MNG-LNK-RSP ] 02 6F 40 E2 00 2F EE D7 01 42 43 15 Fri 09/12/2014 05:37:15 PM : [iNST-TX-I2CS] 02 62 2F EE D7 1F 2F 00 00 02 0F F7 08 00 00 00 00 00 00 00 00 C1 Fri 09/12/2014 05:37:16 PM : [iNST-ACK ] 02 62 2F.EE.D7 1F 2F 00 00 02 0F F7 08 00 00 00 00 00 00 00 00 C1 06 (00) Fri 09/12/2014 05:37:16 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 2F 00 (00) Fri 09/12/2014 05:37:16 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:16 PM : [iNST-TX-I2CS] 02 62 2F EE D7 1F 2F 00 00 00 0F EF 01 00 00 00 00 00 00 00 00 D2 Fri 09/12/2014 05:37:16 PM : [iNST-ACK ] 02 62 2F.EE.D7 1F 2F 00 00 00 0F EF 01 00 00 00 00 00 00 00 00 D2 06 (00) Fri 09/12/2014 05:37:17 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 2F 00 (00) Fri 09/12/2014 05:37:17 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:17 PM : [iNST-ERX ] 02 51 2F EE D7 2F BA B2 11 2F 00 00 01 0F EF 20 00 18 2F BA B2 FF 1F 01 E0 Fri 09/12/2014 05:37:17 PM : [Ext-Direct ] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Fri 09/12/2014 05:37:17 PM : [iNST-TX-I2CS] 02 62 2F EE D7 1F 2F 00 00 00 0F EF 01 00 00 00 00 00 00 00 00 D2 Fri 09/12/2014 05:37:17 PM : [iNST-ACK ] 02 62 2F.EE.D7 1F 2F 00 00 00 0F EF 01 00 00 00 00 00 00 00 00 D2 06 (00) Fri 09/12/2014 05:37:18 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 2F 00 (00) Fri 09/12/2014 05:37:18 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Fri 09/12/2014 05:37:18 PM : [iNST-ERX ] 02 51 2F EE D7 2F BA B2 11 2F 00 00 01 0F EF 20 00 18 2F BA B2 FF 1F 01 E0 Fri 09/12/2014 05:37:18 PM : [Ext-Direct ] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Fri 09/12/2014 05:37:18 PM : [iNST-TX-I2CS] 02 62 2F EE D7 1F 2F 00 00 02 0F EF 08 00 18 2F BA B2 FF 1F 01 F7 Fri 09/12/2014 05:37:18 PM : [iNST-ACK ] 02 62 2F.EE.D7 1F 2F 00 00 02 0F EF 08 00 18 2F BA B2 FF 1F 01 F7 06 (00) Fri 09/12/2014 05:37:19 PM : [iNST-SRX ] 02 50 2F.EE.D7 2F.BA.B2 2B 2F 00 (00) Fri 09/12/2014 05:37:19 PM : [std-Direct Ack] 2F.EE.D7-->ISY/PLM Group=0, Max Hops=3, Hops Left=2
LeeG Posted September 13, 2014 Posted September 13, 2014 The 3.3.10 release does not support the Dual Band KPLs. The Dual Band KPLs became available well after 3.3.10 was released. Need to move to a 994i.
Recommended Posts