bobmre Posted October 17, 2014 Share Posted October 17, 2014 Would I be able to use the Zigbee unit in my ISY994 and put it in this unit and have both Z-Wave and Zigbee from one unit? Bob Moore Link to comment
Techman Posted October 18, 2014 Share Posted October 18, 2014 The ISY supports either Z-wave or Zigbee, but not both at the same time. Link to comment
bobmre Posted October 18, 2014 Author Share Posted October 18, 2014 The information on the Smarthome site says it comes with Z-Wave and that you could add the ZigBee to it. Link to comment
LeeG Posted October 18, 2014 Share Posted October 18, 2014 But that requires removing the ZWave card. As already noted there is one slot for an additional protocol (besides Insteon), either ZigBee or ZWave, but not both. Link to comment
camin123 Posted October 23, 2014 Share Posted October 23, 2014 How can I add zigbee support ? Do you sell an expansion kit ? (Similar to z-wave)? Sent from my iPhone using Tapatalk Link to comment
LeeG Posted October 23, 2014 Share Posted October 23, 2014 Go this this link and scroll down to Accessories https://www.universal-devices.com/sales/ Link to comment
Brian H Posted October 23, 2014 Share Posted October 23, 2014 Check the descriptions of the zigbee devices it supports. Only some devices are supported. Link to comment
Teken Posted November 12, 2014 Share Posted November 12, 2014 Would I be able to use the Zigbee unit in my ISY994 and put it in this unit and have both Z-Wave and Zigbee from one unit? Bob Moore Bob, I know this isn't what you specifically ask for. But, it was noted by UDI in the next 5.XX firmware release that if you had two ISY Series Controllers with the network module. Both of them could communicate with one another so one unit would have Zigbee while the other had Z-wave. Its more hardware cost up front but this does provide a path for having both protocols in a single home. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.