TheWabit Posted November 27, 2014 Posted November 27, 2014 So I have my Triggerlinc set in "On-Off" mode (jumper in). I verified that in the admin panel that when the door opens it turns On and when you close the door it goes Off. I have a notification program set up that when you open the door (On), it will send a text. Then I open the door - wait a couple of seconds and close the door and I get 2 text messages. I think I should only get the one when it turns on. Not a bog deal but any thoughts? If On Mon, Tue, Wed, Thu From 9:30:00AM To 5:30:00PM (same day) And Control 'Triggerlinc' is switched On Then Send Notification to 'Default' content 'Mud Room Door Entry' Else - No Actions - (To add one, press 'Action')
LeeG Posted November 27, 2014 Posted November 27, 2014 Run Tools | Diagnostics | Event Viewer at LEVEL 3. Go through the door Open/Close sequence and post the event trace. It sounds like the TriggerLinc is sending two On messages which can be related to how the magnet interacts with the TriggerLinc.
TheWabit Posted November 27, 2014 Author Posted November 27, 2014 Here it is: Thu 11/27/2014 11:42:29 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 11 01 LTONRR (01)Thu 11/27/2014 11:42:29 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2Thu 11/27/2014 11:42:29 AM : [D2D EVENT ] Event [14 8A FD 1] [DON] [1] uom=0 prec=-1Thu 11/27/2014 11:42:29 AM : [ 14 8A FD 1] DON 1Thu 11/27/2014 11:42:29 AM : [D2D-CMP 000B] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> trueThu 11/27/2014 11:42:29 AM : [D2D-CMP 0009] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> trueThu 11/27/2014 11:42:29 AM : [D2D EVENT ] Event [14 8A FD 1] [sT] [255] uom=0 prec=-1Thu 11/27/2014 11:42:29 AM : [ 14 8A FD 1] ST 255Thu 11/27/2014 11:42:29 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 11 01 LTONRR (01)Thu 11/27/2014 11:42:29 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2Thu 11/27/2014 11:42:30 AM : [D2D EVENT ] Event [14 8A FD 1] [DON] [1] uom=0 prec=-1Thu 11/27/2014 11:42:30 AM : [ 14 8A FD 1] DON 1Thu 11/27/2014 11:42:30 AM : [D2D-CMP 000B] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> trueThu 11/27/2014 11:42:30 AM : [D2D-CMP 0009] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> trueThu 11/27/2014 11:42:32 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 13 01 LTOFFRR(01)Thu 11/27/2014 11:42:32 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2Thu 11/27/2014 11:42:32 AM : [D2D EVENT ] Event [14 8A FD 1] [DOF] [1] uom=0 prec=-1Thu 11/27/2014 11:42:32 AM : [ 14 8A FD 1] DOF 1Thu 11/27/2014 11:42:32 AM : [D2D EVENT ] Event [14 8A FD 1] [sT] [0] uom=0 prec=-1Thu 11/27/2014 11:42:32 AM : [ 14 8A FD 1] ST 0Thu 11/27/2014 11:42:32 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 13 01 LTOFFRR(01)Thu 11/27/2014 11:42:32 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2Thu 11/27/2014 11:42:32 AM : [D2D EVENT ] Event [14 8A FD 1] [DOF] [1] uom=0 prec=-1Thu 11/27/2014 11:42:32 AM : [ 14 8A FD 1] DOF 1
LeeG Posted November 27, 2014 Posted November 27, 2014 Thanks for the trace, there are two On messages. However, my TriggerLincs do the same thing. Suggest adding a Wait 1 second at the beginning of the Then clause. Thu 11/27/2014 11:42:29 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 11:42:29 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 11:42:29 AM : [D2D EVENT ] Event [14 8A FD 1] [DON] [1] uom=0 prec=-1 Thu 11/27/2014 11:42:29 AM : [ 14 8A FD 1] DON 1 Thu 11/27/2014 11:42:29 AM : [D2D-CMP 000B] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 11:42:29 AM : [D2D-CMP 0009] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 11:42:29 AM : [D2D EVENT ] Event [14 8A FD 1] [sT] [255] uom=0 prec=-1 Thu 11/27/2014 11:42:29 AM : [ 14 8A FD 1] ST 255 Thu 11/27/2014 11:42:29 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 11:42:29 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 11:42:30 AM : [D2D EVENT ] Event [14 8A FD 1] [DON] [1] uom=0 prec=-1 Thu 11/27/2014 11:42:30 AM : [ 14 8A FD 1] DON 1 Thu 11/27/2014 11:42:30 AM : [D2D-CMP 000B] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 11:42:30 AM : [D2D-CMP 0009] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true
TheWabit Posted November 27, 2014 Author Posted November 27, 2014 I will try that and report back. Thanks!
TheWabit Posted November 27, 2014 Author Posted November 27, 2014 Lee - it worked great! I appreciate the help.
Teken Posted November 27, 2014 Posted November 27, 2014 Thanks for the trace, there are two On messages. However, my TriggerLincs do the same thing. Suggest adding a Wait 1 second at the beginning of the Then clause. Thu 11/27/2014 11:42:29 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 11:42:29 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 11:42:29 AM : [D2D EVENT ] Event [14 8A FD 1] [DON] [1] uom=0 prec=-1 Thu 11/27/2014 11:42:29 AM : [ 14 8A FD 1] DON 1 Thu 11/27/2014 11:42:29 AM : [D2D-CMP 000B] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 11:42:29 AM : [D2D-CMP 0009] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 11:42:29 AM : [D2D EVENT ] Event [14 8A FD 1] [sT] [255] uom=0 prec=-1 Thu 11/27/2014 11:42:29 AM : [ 14 8A FD 1] ST 255 Thu 11/27/2014 11:42:29 AM : [iNST-SRX ] 02 50 14.8A.FD 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 11:42:29 AM : [std-Group ] 14.8A.FD-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 11:42:30 AM : [D2D EVENT ] Event [14 8A FD 1] [DON] [1] uom=0 prec=-1 Thu 11/27/2014 11:42:30 AM : [ 14 8A FD 1] DON 1 Thu 11/27/2014 11:42:30 AM : [D2D-CMP 000B] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 11:42:30 AM : [D2D-CMP 0009] CTL [14 8A FD 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true LeeG, For the benefit of others what is your guess as to why the device is sending two ON's? As I don't recall this device ever doing this before. Is your device fairly new? Do you have any older units to compare?
LeeG Posted November 27, 2014 Posted November 27, 2014 Several of my battery devices send multiple Group Broadcast On messages. Do not know why they do, perhaps SmartLabs felt battery communication would need assistance since the device cannot monitor power line for conflicting message activity. This is from a motion sensor. Thu 11/27/2014 06:11:18 PM : [iNST-SRX ] 02 50 14.99.51 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 06:11:18 PM : [std-Group ] 14.99.51-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:11:18 PM : [D2D EVENT ] Event [14 99 51 1] [DON] [1] uom=0 prec=-1 Thu 11/27/2014 06:11:18 PM : [ 14 99 51 1] DON 1 Thu 11/27/2014 06:11:18 PM : [D2D-CMP 006B] CTL [14 99 51 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 06:11:18 PM : [D2D-CMP 0045] CTL [14 99 51 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 06:11:18 PM : [D2D EVENT ] Event [14 99 51 1] [sT] [255] uom=0 prec=-1 Thu 11/27/2014 06:11:18 PM : [ 14 99 51 1] ST 255 Thu 11/27/2014 06:11:18 PM : [VAR 2 7 ] 1 Thu 11/27/2014 06:11:18 PM : [iNST-SRX ] 02 50 14.99.51 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 06:11:18 PM : [std-Group ] 14.99.51-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:11:18 PM : [iNST-DUP ] Previous message ignored. Thu 11/27/2014 06:11:18 PM : [iNST-SRX ] 02 50 14.99.51 11.00.01 CB 06 00 (00) Thu 11/27/2014 06:11:18 PM : [std-Group ] 14.99.51-->11.00.01, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:11:18 PM : [iNST-INFO ] Previous message ignored. Thu 11/27/2014 06:11:18 PM : [iNST-SRX ] 02 50 14.99.51 11.00.01 CB 06 00 (00) Thu 11/27/2014 06:11:18 PM : [std-Group ] 14.99.51-->11.00.01, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:11:18 PM : [iNST-INFO ] Previous message ignored. This is from a TriggerLinc Thu 11/27/2014 06:11:53 PM : [iNST-SRX ] 02 50 11.B6.BC 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 06:11:53 PM : [std-Group ] 11.B6.BC-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:11:53 PM : [D2D EVENT ] Event [11 B6 BC 1] [DON] [1] uom=0 prec=-1 Thu 11/27/2014 06:11:53 PM : [ 11 B6 BC 1] DON 1 Thu 11/27/2014 06:11:53 PM : [D2D-CMP 004F] CTL [11 B6 BC 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 06:11:53 PM : [D2D EVENT ] Event [11 B6 BC 1] [sT] [255] uom=0 prec=-1 Thu 11/27/2014 06:11:53 PM : [ 11 B6 BC 1] ST 255 Thu 11/27/2014 06:11:53 PM : [D2D-CMP 003D] STS [11 B6 BC 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> true Thu 11/27/2014 06:11:54 PM : [iNST-SRX ] 02 50 11.B6.BC 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 06:11:54 PM : [std-Group ] 11.B6.BC-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:11:54 PM : [iNST-DUP ] Previous message ignored. Thu 11/27/2014 06:11:54 PM : [iNST-SRX ] 02 50 11.B6.BC 22.80.0B 41 11 01 LTONRR (01) Thu 11/27/2014 06:11:54 PM : [std-Cleanup ] 11.B6.BC-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Thu 11/27/2014 06:11:54 PM : [iNST-DUP ] Previous message ignored. From another TriggerLinc Thu 11/27/2014 06:12:20 PM : [iNST-SRX ] 02 50 11.B8.2D 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 06:12:20 PM : [std-Group ] 11.B8.2D-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:12:20 PM : [D2D EVENT ] Event [11 B8 2D 1] [DON] [1] uom=0 prec=-1 Thu 11/27/2014 06:12:20 PM : [ 11 B8 2D 1] DON 1 Thu 11/27/2014 06:12:20 PM : [D2D-CMP 0061] CTL [11 B8 2D 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Thu 11/27/2014 06:12:20 PM : [D2D EVENT ] Event [11 B8 2D 1] [sT] [255] uom=0 prec=-1 Thu 11/27/2014 06:12:20 PM : [ 11 B8 2D 1] ST 255 Thu 11/27/2014 06:12:20 PM : [iNST-SRX ] 02 50 11.B8.2D 00.00.01 CB 11 01 LTONRR (01) Thu 11/27/2014 06:12:20 PM : [std-Group ] 11.B8.2D-->Group=1, Max Hops=3, Hops Left=2 Thu 11/27/2014 06:12:20 PM : [iNST-DUP ] Previous message ignored. Thu 11/27/2014 06:12:21 PM : [iNST-SRX ] 02 50 11.B8.2D 22.80.0B 41 11 01 LTONRR (01) Thu 11/27/2014 06:12:21 PM : [std-Cleanup ] 11.B8.2D-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Thu 11/27/2014 06:12:21 PM : [iNST-DUP ] Previous message ignored.
Recommended Posts