BamBamF16 Posted December 13, 2014 Share Posted December 13, 2014 Where can I find documentation of the 4-Tap Test and device response? I've scoured all the manuals for my devices and can't for the life of me find it. I must be dense or something. Jeff Link to comment Share on other sites More sharing options...
LeeG Posted December 13, 2014 Share Posted December 13, 2014 The 2413S PLM Quick Start Guide toward the bottom. EDIT: also found 4 tap initiate instructions in the 2992-222 Range Extender (was Access Point) Owner's Manual/Quick Start Guide. Link to comment Share on other sites More sharing options...
BamBamF16 Posted December 13, 2014 Author Share Posted December 13, 2014 Thanks. Been searching for a bit for that. Can I initiate the test from any device (dual band)? Jeff Link to comment Share on other sites More sharing options...
LeeG Posted December 13, 2014 Share Posted December 13, 2014 Some of the latest Dual Band devices have dropped the description of how to initiate the test. As far as I have observed these devices do respond to the test when initiated from another device such as the PLM. Link to comment Share on other sites More sharing options...
Brian H Posted December 13, 2014 Share Posted December 13, 2014 The latest revision of the 2457D2 LampLinc. Uses the Set Button Flow Chart sequence to start what is now called the Beacon Test. I have not see the four Set Button test mentioned in it manual. Though the four button tap may also work and not be documented anymore. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.