thierman Posted December 14, 2014 Posted December 14, 2014 Hi, I hope I'm not asking something obvious, since I couldn't find anything on the 5010L in my searches, I thought I would post. I've had a number of insteon modules over the years, one is the EZSrve 5010L module, which I have written many a perl script for, and is being used to control lights in my house from my computer. I recently purchased an ISY 994i to replace my failing EZLinc 2412N which has been used to control the same lights via iPhone. I had the EZLinc and EZSrve linked to allow each to know about the other, with respect to light control.... But when I attempt to do the same with the ISY's 2413S and the 5010L using the Link management drop down in the Administrative Console, I always get an error about unsupported device... Here is a trace I did recently. Sun 12/14/2014 01:46:16 PM : [91 db 99 ] Added to list of devices to link to ISYSun 12/14/2014 01:46:16 PM : [iNST-TX-I1 ] 02 62 91 DB 99 0F 0D 00Sun 12/14/2014 01:46:16 PM : [iNST-ACK ] 02 62 91.DB.99 0F 0D 00 06 (00)Sun 12/14/2014 01:46:24 PM : [iNST-TX-I1 ] 02 62 91 DB 99 0F 0D 00Sun 12/14/2014 01:46:24 PM : [iNST-ACK ] 02 62 91.DB.99 0F 0D 00 06 (00)Sun 12/14/2014 01:46:33 PM : [iNST-TX-I1 ] 02 62 91 DB 99 0F 0D 00Sun 12/14/2014 01:46:33 PM : [iNST-ACK ] 02 62 91.DB.99 0F 0D 00 06 (00)Sun 12/14/2014 01:46:37 PM : [91 DB 99 0 ] Failed to add device, reason 3Sun 12/14/2014 01:46:37 PM : ---- Start: Generate Scenes from links ----Sun 12/14/2014 01:46:37 PM : ---- End: Generate Scenes from links ----Sun 12/14/2014 01:46:37 PM : [All ] Writing 0 bytes to devices Hoping someone can help shed some light on what I should be doing to make this work... Is this device something that just simply won't be supported? -Chris
LeeG Posted December 14, 2014 Posted December 14, 2014 The EZServ is not a supported device. However, the posted trace does not look correct even for an EZServ. Sun 12/14/2014 05:25:22 PM : [6 4c a5 ] Added to list of devices to link to ISY Sun 12/14/2014 05:25:22 PM : [iNST-TX-I1 ] 02 62 06 4C A5 0F 0D 00 Sun 12/14/2014 05:25:22 PM : [iNST-ACK ] 02 62 06.4C.A5 0F 0D 00 06 (00) Sun 12/14/2014 05:25:22 PM : [iNST-SRX ] 02 50 06.4C.A5 22.80.0B 2B 0D 01 (01) Sun 12/14/2014 05:25:22 PM : [std-Direct Ack] 06.4C.A5-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 12/14/2014 05:25:22 PM : [iNST-TX-I1 ] 02 62 06 4C A5 0F 10 00 Sun 12/14/2014 05:25:22 PM : [iNST-ACK ] 02 62 06.4C.A5 0F 10 00 06 ID-REQ (00) Sun 12/14/2014 05:25:22 PM : [iNST-SRX ] 02 50 06.4C.A5 22.80.0B 2B 10 00 ID-REQ (00) Sun 12/14/2014 05:25:22 PM : [std-Direct Ack] 06.4C.A5-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 12/14/2014 05:25:22 PM : [iNST-SRX ] 02 50 06.4C.A5 00.08.FF 8B 01 00 (00) Sun 12/14/2014 05:25:22 PM : [std-Broadcast] 06.4C.A5-->00.08.FF, Max Hops=3, Hops Left=2 Sun 12/14/2014 05:25:22 PM : [6 4C A5 0 ] Calibrating engine version Sun 12/14/2014 05:25:22 PM : [6 4C A5 0 ] May not fully support i2, reverting to i1 Sun 12/14/2014 05:25:22 PM : [6 4C A5 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000) Sun 12/14/2014 05:25:22 PM : [6 4C A5 0 ] Failed to add device, reason 10 Sun 12/14/2014 05:25:22 PM : [All ] Writing 0 bytes to devices
Recommended Posts