Error -200000/-51 (-5)

[fasttimes]

I have a LampLinc module which I can't write changes too.  I can control the unit just fine from the ISY unit, but I can't get any links going.

 

I'm getting the Error -200000/-51 (-5) message during diagnostics.

 

Here is the error log that was generated when I try to do the write.  The culprit appears to be [D 4A 77 1   ] Link    0 : 0FF8 [A200129FE5FF1F01] *Failed Writing [A200129FE5FF1F01]

 

Any suggestions?

Thu 12/25/2014 03:19:38 : [D 4A 77 1   ] Link    0 : 0FF8 [A200129FE5FF1F01] Writing [A200129FE5FF1F01]

Thu 12/25/2014 03:19:38 : [INST-TX-I1  ] 02 62 0D 4A 77 0F 28 0F

Thu 12/25/2014 03:19:38 : [INST-ACK    ] 02 62 0D.4A.77 0F 28 0F 06          SET-MSB(0F)

Thu 12/25/2014 03:19:40 : [INST-SRX    ] 02 50 0D.4A.77 12.9F.E5 23 28 0F    SET-MSB(0F)

Thu 12/25/2014 03:19:40 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Thu 12/25/2014 03:19:40 : [INST-SRX    ] 02 50 0D.4A.77 12.9F.E5 23 28 0F    SET-MSB(0F)

Thu 12/25/2014 03:19:40 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Thu 12/25/2014 03:19:41 : [INST-TX-I1  ] 02 62 0D 4A 77 0F 2B F8

Thu 12/25/2014 03:19:41 : [INST-ACK    ] 02 62 0D.4A.77 0F 2B F8 06          PEEK   (F8)

Thu 12/25/2014 03:19:41 : [        Time] 03:19:41 0(0)

Thu 12/25/2014 03:19:41 : [INST-TX-I1  ] 02 62 28 1E 31 0F 11 FF

Thu 12/25/2014 03:19:41 : [INST-ACK    ] 02 62 28.1E.31 0F 11 FF 06          LTONRR (FF)

Thu 12/25/2014 03:19:41 : [Std MH      ] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Thu 12/25/2014 03:19:43 : [INST-SRX    ] 02 50 28.1E.31 12.9F.E5 2B 11 FF    LTONRR (FF)

Thu 12/25/2014 03:19:43 : [Std-Direct Ack] 28.1E.31-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Thu 12/25/2014 03:19:46 : [INST-TX-I1  ] 02 62 0D 4A 77 0F 28 0F

Thu 12/25/2014 03:19:46 : [INST-ACK    ] 02 62 0D.4A.77 0F 28 0F 06          SET-MSB(0F)

Thu 12/25/2014 03:19:55 : [INST-TX-I1  ] 02 62 0D 4A 77 0F 28 0F

Thu 12/25/2014 03:19:55 : [INST-ACK    ] 02 62 0D.4A.77 0F 28 0F 06          SET-MSB(0F)

Thu 12/25/2014 03:19:56 : [        Time] 03:19:56 0(0)

Thu 12/25/2014 03:19:56 : [INST-TX-I1  ] 02 62 28 1E 31 0F 11 FF

Thu 12/25/2014 03:19:56 : [INST-ACK    ] 02 62 28.1E.31 0F 11 FF 06          LTONRR (FF)

Thu 12/25/2014 03:19:56 : [Std MH      ] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Thu 12/25/2014 03:19:56 : [D 4A 77 1   ] Link    0 : 0FF8 [A200129FE5FF1F01] *Failed Writing [A200129FE5FF1F01]

Thu 12/25/2014 03:19:57 : [INST-SRX    ] 02 50 0D.4A.77 12.9F.E5 23 28 0F    SET-MSB(0F)

Thu 12/25/2014 03:19:57 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Thu 12/25/2014 03:19:57 : [INST-SRX    ] 02 50 0D.4A.77 12.9F.E5 23 28 0F    SET-MSB(0F)

Thu 12/25/2014 03:19:57 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Thu 12/25/2014 03:19:58 : [INST-SRX    ] 02 50 28.1E.31 12.9F.E5 2B 11 FF    LTONRR (FF)

Thu 12/25/2014 03:19:58 : [Std-Direct Ack] 28.1E.31-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

[LeeG]

The LampLinc 0D.4A.77 has poor comm with the PLM.  The Max Hops=3, Hops Left=0 is the at the extreme bad end of the spectrum.   Several commands received no response at all.

 

Thu 12/25/2014 03:19:38 : [D 4A 77 1 ] Link 0 : 0FF8 [A200129FE5FF1F01] Writing [A200129FE5FF1F01]

Thu 12/25/2014 03:19:38 : [INST-TX-I1 ] 02 62 0D 4A 77 0F 28 0F

Thu 12/25/2014 03:19:38 : [INST-ACK ] 02 62 0D.4A.77 0F 28 0F 06 SET-MSB(0F)

Thu 12/25/2014 03:19:40 : [INST-SRX ] 02 50 0D.4A.77 12.9F.E5 23 28 0F SET-MSB(0F)

Thu 12/25/2014 03:19:40 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Thu 12/25/2014 03:19:40 : [INST-SRX ] 02 50 0D.4A.77 12.9F.E5 23 28 0F SET-MSB(0F)

Thu 12/25/2014 03:19:40 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

 

This command did not get a device response.

Thu 12/25/2014 03:19:41 : [INST-TX-I1 ] 02 62 0D 4A 77 0F 2B F8

Thu 12/25/2014 03:19:41 : [INST-ACK ] 02 62 0D.4A.77 0F 2B F8 06 PEEK (F8)

Thu 12/25/2014 03:19:41 : [ Time] 03:19:41 0(0)

Thu 12/25/2014 03:19:41 : [INST-TX-I1 ] 02 62 28 1E 31 0F 11 FF

Thu 12/25/2014 03:19:41 : [INST-ACK ] 02 62 28.1E.31 0F 11 FF 06 LTONRR (FF)

Thu 12/25/2014 03:19:41 : [Std MH ] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Thu 12/25/2014 03:19:43 : [INST-SRX ] 02 50 28.1E.31 12.9F.E5 2B 11 FF LTONRR (FF)

 

This device has great comm with PLM

Thu 12/25/2014 03:19:43 : [Std-Direct Ack] 28.1E.31-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

 

This command got no response from device

Thu 12/25/2014 03:19:46 : [INST-TX-I1 ] 02 62 0D 4A 77 0F 28 0F

Thu 12/25/2014 03:19:46 : [INST-ACK ] 02 62 0D.4A.77 0F 28 0F 06 SET-MSB(0F)

 

This command got no response from device

Thu 12/25/2014 03:19:55 : [INST-TX-I1 ] 02 62 0D 4A 77 0F 28 0F

Thu 12/25/2014 03:19:55 : [INST-ACK ] 02 62 0D.4A.77 0F 28 0F 06 SET-MSB(0F)

Thu 12/25/2014 03:19:56 : [ Time] 03:19:56 0(0)

 

Thu 12/25/2014 03:19:56 : [INST-TX-I1 ] 02 62 28 1E 31 0F 11 FF

Thu 12/25/2014 03:19:56 : [INST-ACK ] 02 62 28.1E.31 0F 11 FF 06 LTONRR (FF)

Thu 12/25/2014 03:19:56 : [Std MH ] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Thu 12/25/2014 03:19:56 : [D 4A 77 1 ] Link 0 : 0FF8 [A200129FE5FF1F01] *Failed Writing [A200129FE5FF1F01]

Thu 12/25/2014 03:19:57 : [INST-SRX ] 02 50 0D.4A.77 12.9F.E5 23 28 0F SET-MSB(0F)

Thu 12/25/2014 03:19:57 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Thu 12/25/2014 03:19:57 : [INST-SRX ] 02 50 0D.4A.77 12.9F.E5 23 28 0F SET-MSB(0F)

Thu 12/25/2014 03:19:57 : [Std-Direct Ack] 0D.4A.77-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Thu 12/25/2014 03:19:58 : [INST-SRX ] 02 50 28.1E.31 12.9F.E5 2B 11 FF LTONRR (FF)

Thu 12/25/2014 03:19:58 : [Std-Direct Ack] 28.1E.31-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

 

Could be interference from something on the powerline at the plug point.   Could be the type of load the LampLinc is trying to control.