Help with keyfob programming.

[bobmre]

Does anyone know how to program the ISY so that when a button is pressed on an elk keyfob it will lock or unlock a zwave lock?

[shannong]

I use a dummy output for this combined with an Automation Rule. The outputs above 65 aren't "real" unless you have an expander attached. However, you can still tell the Elk to turn them On/Off and the ISY can see that status change.

 

I have an Automation Rule that says something like this:

 

When RF Key Fob Button 3 Is Activated

Then Turn Output 200 On for 2 Seconds

 

Now you can write an ISY program that says:

 

If Elk Output 200 is On

Then  <whatever you want>

[bobmre]

Thank you, that makes sense.