I am trying to start up my new ISY994zw PRO for Z-wave only.  I do not have or want a PLM.

 

In the admin console, I receive an alert that I am in safe mode, because there is no PLM.

 

I am assuming that the lack of PLM is preventing the ISY from Reading the list of existing Z-wave devices from my Simon XT2.

 

I am stuck, so any help would help.

 

I have searched the UD forums looking for suggestions.

What ISY firmware is being used?   4.3.8 may have that ability built in.   If not UDI can supply you with a version that does not require a PLM.

This is for the latest Beta 4.3.8 RC under steps 2m1 which you will select the second link for those not having a PLM. http://forum.universal-devices.com/topic/16285-release-438-rc4-is-now-available/

 

This is another reference thread which indicates should the PLM fail. The Z-Wave portion will continue to operate in a hybrid Insteon / Z-Wave environment: http://forum.universal-devices.com/topic/14667-udi-plm/

The ISY firmware is 4.2.30

 

I have been looking on the  UDI website for firmware options, but have not seen anything that addresses the PLM. 

 

Do you have a specific reference?

 

Posted this before seeing the perfect reference reply.  Many thanks.

The ISY firmware is 4.2.30

 

I have been looking on the  UDI website for firmware options, but have not seen anything that addresses the PLM. 

 

Do you have a specific reference?

 

I would first suggest you upgrade the firmware to the latest 4.3.8 RC4 so everyone is using the same reference point. In the link I provided above in steps 2m1 there are two links.

 

You will simply install the second link which indicates no PLM.

http://forum.universal-devices.com/topic/16285-release-438-rc4-is-now-available/

 

There is a no PLM version and with PLM version of the firmware in the above release post.

Teken:  Your links are just what I needed.  The Z-wave function of the ISY994zw Pro now works, and no missing PLM message.  This makes a good ending to several days of futile attempts to get going.

Teken: Your links are just what I needed. The Z-wave function of the ISY994zw Pro now works, and no missing PLM message. This makes a good ending to several days of futile attempts to get going.

Glad it all worked out, and apologies for the many days of endless searching. [emoji18]

 

Many of us can relate and have been there too! [emoji5]️[emoji4]

 

 

Ideals are peaceful - History is violent