Update KPL buttons status

[hchain]

I have a KPL with 4 buttons that control scenes:

Each scene is:

Button as controller

Lights in corresponding room as responders

So Button A controls Room 1, B controls 2, etc.

Everything works fine.

 

I have a 5th button 'All Lights OFF' which is toggle off, so pressing it always turn all my lights off, but the LEDs of the individual buttons don't turn off.

I used the button as the Controller and the all the lights in the 4 rooms as Responders.

 

How can I make the LED of the individual buttons turn off along with the lights?

 

Thanks for the help.

 

RV

[LeeG]

Add buttons A, B, C, D (assuming those are the correct buttons) as Responders to the All Lights Off Scene.   Turning the devices On/Off controlled by the buttons has no affect on the KPL Controller buttons that affect those devices.

[hchain]

Perfect 10 again!

 

Thanks, LeeG!

 

RV

[LeeG]

Happy to.   There is an insteondetails.pdf document on insteon.com that may help with how Insteon works.   There is more detail than most folks are looking to learn but some of the higher level information may be helpful.

[hchain]

Looks somewhat above my head but I am sure I will get information I can use.

Thanks for pointing it out.

 

RV