ISY994i errors during restore of backup

[ArunGupta2014]

I recently had to restore backup to ISY994i IR/Pro after doing a hard reset. I noticed that restore generated couple of errors, I forgot to note them down. Is it normal to see errors during restore? Version 4.2.30.

 

Thanks,

Arun

 

[Techman]

If you have any battery operated devices they need to be put into linking mode, one device at a time, then do a restore device. Battery operated devices sleep until put into the linking mode in order to save battery life.

 

Take a look at your devices to see if you have any 1101 next to the device name which indicates that it needs to be written to.

[ArunGupta2014]

There are no battery operated devices. I only have 2477 and 2466 type switches. No devices have 1101 against them.

 

Thanks,

Arun

[Techman]

If they're are no ! or no 1101 to the left off the device names in your device tree then you're probably OK. 

 

You can always run a link table diagnostics and then a compare for a device if you think you may have an issue with a particular device. If errors show up then do a restore device to correct them.

 

I've also had error messages come and go when doing a restore but all seemed to be OK.

[ArunGupta2014]

Thanks...!!