whlatimer Posted September 10, 2015 Share Posted September 10, 2015 Trying to get my ISY994 and related Insteon gear up and running at the new house. Connected everything as I remembered at the old house. ISY994 is recognized on LAN connected via RJ45 to router. Plugged Insteaon 2413S PLM into wall outlet and connected standard RJ45 cable to Port A on ISY994. I can use ISY994 Admin program, but PLM cannot be located. I have only tried plugging the PLM into one outlet, near yo where the cable modem / wifi router is located. Any thoughts ladies and gentlemen? TIA Link to comment Share on other sites More sharing options...
Michel Kohanim Posted September 10, 2015 Share Posted September 10, 2015 Hi whlatimer, If ISY is in safe mode, then in all likelihood the PLM is dead. Is the light on the PLM lit? With kind regards, Michel Link to comment Share on other sites More sharing options...
Xathros Posted September 10, 2015 Share Posted September 10, 2015 Or, the ISY was booted a while before the PLM was connected - based on the first post, I bet this is the case. With the PLM connected to Port A and powered, power cycle the just the ISY and try again. -Xathros Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.