Jump to content

Log question

clark21236

By clark21236
in ISY994

Recommended Posts

clark21236 New

clark21236

Posted
Posted

Yesterday I had an issue where my Xmas light program did not run. I looked in the log file to see if I could figure out what happened. Here is what showed up in the log file. I am running 2.6.8 in my ISY.

 

What you will see is that on the 19th the system shut down my XMas light scene. Then at 12:09 it ran into a time server issue, then who knows what happened.

 

Scene:XMas Lights Off 0 Fri 12/19/2008 10:00:01 PM Program Log

0 null Sat 12/20/2008 12:09:24 AM System Start

0 pool.nt Sat 12/20/2008 12:09:29 AM System -60001

05.CA.F1.1 (John Side) Status 0% Sat 12/20/2008 12:09:29 AM System Log

05.CA.F1.1 (John Side) On Level 100% Sat 12/20/2008 12:09:30 AM System Log

05.CA.F1.1 (John Side) Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:31 AM System Log

0A.87.98.1 (Mary Side) Status 0% Sat 12/20/2008 12:09:32 AM System Log

0A.87.98.1 (Mary Side) On Level 100% Sat 12/20/2008 12:09:33 AM System Log

0A.87.98.1 (Mary Side) Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:34 AM System Log

FR KPL Off/On Status 0% Sat 12/20/2008 12:09:34 AM System Log

FR KPL Off/On On Level 100% Sat 12/20/2008 12:09:35 AM System Log

FR KPL Off/On Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:36 AM System Log

MBR KPL Off/On Status 100% Sat 12/20/2008 12:09:37 AM System Log

MBR KPL Off/On On Level 100% Sat 12/20/2008 12:09:38 AM System Log

MBR KPL Off/On Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:39 AM System Log

Pool Pump Inlinelinc Status 0% Sat 12/20/2008 12:09:39 AM System Log

Pool Pump Inlinelinc On Level 100% Sat 12/20/2008 12:09:40 AM System Log

Pool Pump Inlinelinc Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:41 AM System Log

Front Porch Light Status 0% Sat 12/20/2008 12:09:42 AM System Log

Front Porch Light On Level 100% Sat 12/20/2008 12:09:43 AM System Log

Front Porch Light Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:44 AM System Log

Loft Fan Light Status 0% Sat 12/20/2008 12:09:44 AM System Log

Loft Fan Light On Level 100% Sat 12/20/2008 12:09:45 AM System Log

Loft Fan Light Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:46 AM System Log

Laundry Rm Slave Status 0% Sat 12/20/2008 12:09:47 AM System Log

Laundry Rm Slave On Level 100% Sat 12/20/2008 12:09:48 AM System Log

Laundry Rm Slave Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:49 AM System Log

Kitchen High Hat Slave Status 0% Sat 12/20/2008 12:09:49 AM System Log

Kitchen High Hat Slave On Level 100% Sat 12/20/2008 12:09:50 AM System Log

Kitchen High Hat Slave Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:51 AM System Log

Laundry Rm Master Status 0% Sat 12/20/2008 12:09:52 AM System Log

Laundry Rm Master On Level 100% Sat 12/20/2008 12:09:53 AM System Log

Laundry Rm Master Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:54 AM System Log

Kitchen High Hat Master Status 0% Sat 12/20/2008 12:09:54 AM System Log

Kitchen High Hat Master On Level 100% Sat 12/20/2008 12:09:55 AM System Log

Kitchen High Hat Master Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:56 AM System Log

0E.18.07.1 (Xmas Tree) Status 0% Sat 12/20/2008 12:09:57 AM System Log

0E.18.07.1 (Xmas Tree) On Level 100% Sat 12/20/2008 12:09:58 AM System Log

0E.18.07.1 (Xmas Tree) Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:59 AM System Log

0E.1A.CC.1 (Xmas Bannister) Status 0% Sat 12/20/2008 12:09:59 AM System Log

0E.1A.CC.1 (Xmas Bannister) On Level 100% Sat 12/20/2008 12:10:00 AM System Log

0E.1A.CC.1 (Xmas Bannister) Ramp Rate 2.0 Sec Sat 12/20/2008 12:10:01 AM System Log

MBR SLD Right Status 0% Sat 12/20/2008 12:10:02 AM System Log

MBR SLD Right On Level 100% Sat 12/20/2008 12:10:03 AM System Log

MBR SLD Right Ramp Rate 0.1 Sec Sat 12/20/2008 12:10:04 AM System Log

Scene:My Lighting Status 0% Sat 12/20/2008 03:00:00 AM Program Log

 

I looked at some earlier entries, before the ones I have posted here, and it looks like there could be some weird stuff going on. If I read it correctly, it looks like the system is turning some lights on and off all by itself at just after 12:00 am.

Link to comment
Michel Kohanim Wise Elder

Michel Kohanim

Posted
Posted

Hello clark21236,

 

The time server issue is not what bothers me. The problem was that your system was rebooted at 12:09 on 12/20:

0	null	 	Sat 12/20/2008 12:09:24 AM	System	Start

 

So, when ISY restarts and if you have not set ISY to run your program at startup, then your program will not run till the next time (perhaps next day) that it's scheduled.

 

Now, my questions:

1. Did you have a power outage

2. Is that program enabled to be run at start up?

 

With kind regards,

Michel

 

Yesterday I had an issue where my Xmas light program did not run. I looked in the log file to see if I could figure out what happened. Here is what showed up in the log file. I am running 2.6.8 in my ISY.

 

What you will see is that on the 19th the system shut down my XMas light scene. Then at 12:09 it ran into a time server issue, then who knows what happened.

 

Scene:XMas Lights Off 0 Fri 12/19/2008 10:00:01 PM Program Log

0 null Sat 12/20/2008 12:09:24 AM System Start

0 pool.nt Sat 12/20/2008 12:09:29 AM System -60001

05.CA.F1.1 (John Side) Status 0% Sat 12/20/2008 12:09:29 AM System Log

05.CA.F1.1 (John Side) On Level 100% Sat 12/20/2008 12:09:30 AM System Log

05.CA.F1.1 (John Side) Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:31 AM System Log

0A.87.98.1 (Mary Side) Status 0% Sat 12/20/2008 12:09:32 AM System Log

0A.87.98.1 (Mary Side) On Level 100% Sat 12/20/2008 12:09:33 AM System Log

0A.87.98.1 (Mary Side) Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:34 AM System Log

FR KPL Off/On Status 0% Sat 12/20/2008 12:09:34 AM System Log

FR KPL Off/On On Level 100% Sat 12/20/2008 12:09:35 AM System Log

FR KPL Off/On Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:36 AM System Log

MBR KPL Off/On Status 100% Sat 12/20/2008 12:09:37 AM System Log

MBR KPL Off/On On Level 100% Sat 12/20/2008 12:09:38 AM System Log

MBR KPL Off/On Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:39 AM System Log

Pool Pump Inlinelinc Status 0% Sat 12/20/2008 12:09:39 AM System Log

Pool Pump Inlinelinc On Level 100% Sat 12/20/2008 12:09:40 AM System Log

Pool Pump Inlinelinc Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:41 AM System Log

Front Porch Light Status 0% Sat 12/20/2008 12:09:42 AM System Log

Front Porch Light On Level 100% Sat 12/20/2008 12:09:43 AM System Log

Front Porch Light Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:44 AM System Log

Loft Fan Light Status 0% Sat 12/20/2008 12:09:44 AM System Log

Loft Fan Light On Level 100% Sat 12/20/2008 12:09:45 AM System Log

Loft Fan Light Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:46 AM System Log

Laundry Rm Slave Status 0% Sat 12/20/2008 12:09:47 AM System Log

Laundry Rm Slave On Level 100% Sat 12/20/2008 12:09:48 AM System Log

Laundry Rm Slave Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:49 AM System Log

Kitchen High Hat Slave Status 0% Sat 12/20/2008 12:09:49 AM System Log

Kitchen High Hat Slave On Level 100% Sat 12/20/2008 12:09:50 AM System Log

Kitchen High Hat Slave Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:51 AM System Log

Laundry Rm Master Status 0% Sat 12/20/2008 12:09:52 AM System Log

Laundry Rm Master On Level 100% Sat 12/20/2008 12:09:53 AM System Log

Laundry Rm Master Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:54 AM System Log

Kitchen High Hat Master Status 0% Sat 12/20/2008 12:09:54 AM System Log

Kitchen High Hat Master On Level 100% Sat 12/20/2008 12:09:55 AM System Log

Kitchen High Hat Master Ramp Rate 0.1 Sec Sat 12/20/2008 12:09:56 AM System Log

0E.18.07.1 (Xmas Tree) Status 0% Sat 12/20/2008 12:09:57 AM System Log

0E.18.07.1 (Xmas Tree) On Level 100% Sat 12/20/2008 12:09:58 AM System Log

0E.18.07.1 (Xmas Tree) Ramp Rate 2.0 Sec Sat 12/20/2008 12:09:59 AM System Log

0E.1A.CC.1 (Xmas Bannister) Status 0% Sat 12/20/2008 12:09:59 AM System Log

0E.1A.CC.1 (Xmas Bannister) On Level 100% Sat 12/20/2008 12:10:00 AM System Log

0E.1A.CC.1 (Xmas Bannister) Ramp Rate 2.0 Sec Sat 12/20/2008 12:10:01 AM System Log

MBR SLD Right Status 0% Sat 12/20/2008 12:10:02 AM System Log

MBR SLD Right On Level 100% Sat 12/20/2008 12:10:03 AM System Log

MBR SLD Right Ramp Rate 0.1 Sec Sat 12/20/2008 12:10:04 AM System Log

Scene:My Lighting Status 0% Sat 12/20/2008 03:00:00 AM Program Log

 

I looked at some earlier entries, before the ones I have posted here, and it looks like there could be some weird stuff going on. If I read it correctly, it looks like the system is turning some lights on and off all by itself at just after 12:00 am.

Link to comment
clark21236 New

clark21236

Posted
  • Author
Posted
Hello clark21236,

 

So, when ISY restarts and if you have not set ISY to run your program at startup, then your program will not run till the next time (perhaps next day) that it's scheduled.

 

Now, my questions:

1. Did you have a power outage

2. Is that program enabled to be run at start up?

 

With kind regards,

Michel

 

Michel, I won't rule out a power outage, but I have no other signs in my house that it did occur.

 

I guess the part that is hard to understand is this.

 

If
       From    Sunset 
       To      10:00:00PM (same day)

Then
       Set Scene 'XMas Lights' On

Else
       Set Scene 'XMas Lights' Off

 

If the ISY reboots at 9 minutes after midnight, shouldn't the code above run that same day? I don't understand why it would need to wait until the next day to run.

 

As for run at start up, I don't have any of my programs set to do that. Maybe I need to be pointed to the right location to understand what that feature will do for me.

 

Thanks for the help.

Steve

Link to comment
Sub-Routine Advanced

Sub-Routine

Posted
Posted
If the ISY reboots at 9 minutes after midnight, shouldn't the code above run that same day? I don't understand why it would need to wait until the next day to run.

 

Catch up at Restart (Configuration) has a few glitches this way. They were gone for a while but I think some are back. For now I have unchecked that option. After a power outage the lights should return to their previous levels, so if no schedules were missed nothing is wrong.

 

Rand

Link to comment
Michel Kohanim Wise Elder

Michel Kohanim

Posted
Posted

Hello Steve,

 

Then answer is NO. The problem is that time sensitive programs have to be re-evaluated at start-up explicitly. All this is due to the fact that most people did not want their schedules to run after each restart nor did they want ISY to catch up to schedules that were not run. So, what you have to do is:

1. For programs that are TIME only (like yours), please decide if you want to run them at start up ... you can do this in program summary

2. Please decide if you want ISY to catchup (run programs that may have been missed) ... you can do this in Configuration Tab under System

3. And, finally, what grace period ... you can do this in Configuration Tab under System

 

With kind regards,

Michel

 

 

 

If
       From    Sunset 
       To      10:00:00PM (same day)

Then
       Set Scene 'XMas Lights' On

Else
       Set Scene 'XMas Lights' Off

 

If the ISY reboots at 9 minutes after midnight, shouldn't the code above run that same day? I don't understand why it would need to wait until the next day to run.

 

As for run at start up, I don't have any of my programs set to do that. Maybe I need to be pointed to the right location to understand what that feature will do for me.

 

Thanks for the help.

Steve

Link to comment

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...