How to Interrupt Timer and Flashing KPL Button

[MikeF]

First, thanks to all who have posted programs and solutions.  I have learned a lot.

 

I have two 8 button KPLs that control several lighting circuits in my kitchen.  I have configured KPL button G as "All Off Delayed."  When pressed, the G button LED on the KPLs will flash once a second and start the timer.  After a period of time, a set of kitchen lights will flash warning occupants the lights are about to go out.  After more time, the lights turn off.  I have successfully been able to interrupt the timing feature and G button flash by turning on kitchen lights in the set, but I have not been able to consistently interrupt the timer and G button flash when I press the G button. I am confident this is due to one of the conditions of the "IF" statement and the state of the button's LED; when it's on and I press the button it will interrupt the timing feature.  Conversely, when the LED is off and I press the button it will not.  I have tried variables without success.  I have also tried the change KPL G to Toggle ON, but the logic doesn't work on that either.

 

Anyone have any ideas?  

 

Kit All Off Dly KPL G - [iD 0019][Parent 0001]

 

If

        (

             Control 'Kit NE KPL G' is switched On

          Or Control 'Kit S KPL G' is switched On

        )

    And (

             Control 'Kit NE KPL G' is not switched Off

          Or Control 'Kit S KPL G' is not switched Off

          Or Control 'Kit Dining-NW' is not switched On

          Or Control 'Kit NE KPL A' is not switched On

          Or Control 'Kit S KPL A' is not switched On

          Or Control 'Kit NE KPL A' is not switched Fast On

          Or Control 'Kit S KPL A' is not switched Fast On

          Or Control 'Kit NE KPL B' is not switched On

          Or Control 'Kit S KPL B' is not switched On

          Or Control 'Kit NE KPL B' is not switched Fast On

          Or Control 'Kit S KPL B' is not switched Fast On

          Or Control 'Kit NE KPL C' is not switched On

          Or Control 'Kit S KPL C' is not switched On

          Or Control 'Kit NE KPL D' is not switched On

          Or Control 'Kit S KPL D' is not switched On

          Or Control 'Kit NE KPL E' is not switched On

          Or Control 'Kit NE KPL F' is not switched On

          Or Control 'Kit Under Cab NE' is not switched On

          Or Control 'Kit Under Cab NW' is not switched On

          Or Control 'Kit Under Cab SE' is not switched On

          Or Control 'Kit Under Cab SW' is not switched On

        )

 

Then

        Run Program 'Kit KPL G Button Flash' (Then Path)

        Wait  10 seconds

        Repeat 2 times

           Set 'Kit NE KPL A' Fast Off

           Wait  1 second

           Set 'Kit NE KPL A' Fast On

           Wait  1 second

        Repeat 1 times

           Wait  5 seconds

           Set Scene 'All Kitchen' Off

           Wait  30 seconds

           Stop program 'Kit KPL G Button Flash'

 

Else

        Stop program 'Kit KPL G Button Flash'

        Set Scene 'Kit KPL G Buttons' Off

 

_________________________________

Here is the button flash program:

 

Kit KPL G Button Flash - [iD 001A][Parent 0001]

 

If

   - No Conditions - (To add one, press 'Schedule' or 'Condition')

 

Then

        Repeat Every  1 second

           Set Scene 'Kit KPL G Buttons' On

           Wait  1 second

           Set Scene 'Kit KPL G Buttons' Off

 

Else

   - No Actions - (To add one, press 'Action')

 

 

 

 

[Techman]

Try using something like:

 

If

Control 'Kit NE KPL G' is switched FAST Off

or

Control 'Kit NE KPL G' is switched FAST ON

 

Then

   Stop program

Edited February 20, 2016 by Techman

[MikeF]

Thank you.  Using the additional program worked.  

 

Too bad Insteon does not have a LED button flash option for the KPL's.