peedeevee Posted May 29, 2016 Share Posted May 29, 2016 I have a scene that I am trying to get working properly. It consists of controller - Keypadlinc 6 - button D responders - keypadlinc dimmer - load regular dimmer on/off module (non-dimmable lamp plugged into on/off module) The scene is set so that the keypadlinc dimmer is set for 32%, the regular dimmer for 50% and the on/off module to 0% - I want that light off in this scene. When I test it from ISY it works properly. The scene responders dim and the on/off turns off. But when I use it from the kepadlinc the on/off module turns on. I finally removed it from the scene because I could not figure it out. peedeevee Link to comment
MWareman Posted May 29, 2016 Share Posted May 29, 2016 When you set scene on levels, you are setting only that controller - the ISY by default. You will need to copy the on levels to other scene controllers. I'm away from my system currently, and am currently unable to remember the specifics though. I think you would select your KPL within the scene. Link to comment
peedeevee Posted May 29, 2016 Author Share Posted May 29, 2016 That did the trick. Thank you for your help. peedeevee Link to comment
DavidS Posted August 20, 2016 Share Posted August 20, 2016 This helped me too...thanks MWareman! I took this screenshot in case anyone has trouble understanding where this is set. FR KPL - Button A is the controller for scene Family Room Normal. Select the controller button FR KPL - Button A and then click the Copy Scene Attributes From... button to set the levels that will be applied to the responders when the controller button is pushed. This will copy the responder dim level settings from the defined scene. DavidS Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.