jleves Posted June 9, 2016 Posted June 9, 2016 I've setup programs to alert me when the Schlage locks are locked or unlocked via the keypad. Two questions that I can't figure out: 1) Can the alert tell me which user code was used to unlock the keypad? I can't find an obvious solution. 2) Is there anyway to rename the user code from User N to Bob or something like that? As always, thanks in advance.
jleves Posted June 9, 2016 Author Posted June 9, 2016 Which Schlage lock? Schlage Connect Touchscreen Deadbolt with Alarm MODEL BE369 Is that enough information?
stusviews Posted June 9, 2016 Posted June 9, 2016 No to both. The BE469 will allow you to query specific users.
jleves Posted June 9, 2016 Author Posted June 9, 2016 No to both. The BE469 will allow you to query specific users. Bummer - I don't suppose there is a way to upgrade the firmware?
stusviews Posted June 9, 2016 Posted June 9, 2016 Nope. Schlage doesn't even have interchangeable parts between different locks. For example, when I went from the BE369 to the BE469, I had to change the bolt, too.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.