Scyto Posted July 22, 2016 Posted July 22, 2016 I updated the GEM COM firmware today. I have packet format 4. Suddenly counters and temp sensors appeared even though they are unchecked in the GEMs UI. Any ideas?
io_guy Posted July 22, 2016 Posted July 22, 2016 I fixed a bug in NodeLink that didn't show them. Format 4 is junk. It sends all data regardless of what you have configured to send (so you'll get 32 channels, 8 counters, 8 temps). If you switch to one of the other supported formats it will just populate what you've selected.
Scyto Posted July 25, 2016 Author Posted July 25, 2016 I fixed a bug in NodeLink that didn't show them. Format 4 is junk. It sends all data regardless of what you have configured to send (so you'll get 32 channels, 8 counters, 8 temps). If you switch to one of the other supported formats it will just populate what you've selected. Ok changed to 14, deleted the counters and temp sensors in ISY, rebooted and the temp sensor and counters came back. Is there a way for me to stop that?
io_guy Posted July 25, 2016 Posted July 25, 2016 I can't reproduce this (just tried 14, I use 2). So in the GEM you have the "Data Post" page setup with only the items you want to send?
Scyto Posted July 25, 2016 Author Posted July 25, 2016 I can't reproduce this (just tried 14, I use 2). So in the GEM you have the "Data Post" page setup with only the items you want to send? Yup, like this (it has been like this for 12+mo) recent change was to move to latest com firmware...:
Scyto Posted July 25, 2016 Author Posted July 25, 2016 ignore me i see it is still set to packet 4 - i swear i saved it.... setting to 14 now, every thing now works
Recommended Posts
Archived
This topic is now archived and is closed to further replies.