JayC Posted August 2, 2016 Posted August 2, 2016 I have a simple scene setup between a 6 Button Keypad-Linc and a Fanlinc. The one On/Off buttons on the KPL work the Fan Light, and the A Button on the KPL works the Fan Motor. A Button and the Fan Motor work fine however the On/Off buttons and the Fan Light do not. I have tried toggling the Fan Light directly rather than the scene with no luck either. I have the same configuration set up 3x in my home and all have been working perfectly until now. I upgraded to 5.0.4 roughly 2 weeks ago, so I don't believe this is hurting me. Below is the logfile from a scene test. Nothing looks out of the ordinary to me. Any thoughts or help would be greatly appreciated. Tue 08/02/2016 05:52:35 PM : [GRP-RX ] 02 61 11 13 00 06 Tue 08/02/2016 05:52:35 PM : [INST-SRX ] 02 50 32.33.A0 39.00.D3 61 13 11 LTOFFRR(11) Tue 08/02/2016 05:52:35 PM : [Std-Cleanup Ack] 32.33.A0-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Tue 08/02/2016 05:52:35 PM : [CLEAN-UP-RPT] 02 58 06 Tue 08/02/2016 05:52:36 PM : [INST-SRX ] 02 50 34.DE.F6 39.00.D3 61 13 11 LTOFFRR(11) Tue 08/02/2016 05:52:36 PM : [Std-Cleanup Ack] 34.DE.F6-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 <html><font color="red">----- MBRLTOn Test Results -----</font></html> <html><font color="red">[Succeeded]</font> MBRLT (32 33 A0 1)</html> <html><font color="red">[Succeeded]</font> MBRKPL (34 DE F6 1)</html> <html><font color="red">----- MBRLTOn Test Results -----</font></html>
Recommended Posts