Jump to content

Brultech - NodeLink sending unselected GEM channel data to emoncms


mblitz

Recommended Posts

I have selected channels 1 through 29 and channel 32 in the "GEM Setup" "Data Post" page.  I am not using channels 30 and 31.

 

NodeLink receives the selected channels and shows them on its' GEM page.  It does not display the unselected channels, 30 and 31.

 

NodeLink appears to send all the channels, including the unselected channels to my isy994i.  Channels 30 and 31 have 0 values on the isy.

 

NodeLink also appears to send all the channels to emoncms, but instead of sending 0 for channels 30 and 31, it sends blank, which causes an error in emoncms:

 

2017-01-12 01:26:41.396|ERROR|input_controller.php|test 1

2017-01-12 01:26:41.398|ERROR|input_controller.php|chan30_a

2017-01-12 01:26:41.399|ERROR|input_controller.php|test 2

2017-01-12 01:26:41.400|ERROR|input_controller.php|

2017-01-12 01:26:41.401|ERROR|input_controller.php|test 1

2017-01-12 01:26:41.402|ERROR|input_controller.php|chan30_w

2017-01-12 01:26:41.403|ERROR|input_controller.php|test 2

2017-01-12 01:26:41.404|ERROR|input_controller.php|

2017-01-12 01:26:41.406|ERROR|input_controller.php|test 1

2017-01-12 01:26:41.407|ERROR|input_controller.php|chan31_a

2017-01-12 01:26:41.408|ERROR|input_controller.php|test 2

2017-01-12 01:26:41.409|ERROR|input_controller.php|

2017-01-12 01:26:41.410|ERROR|input_controller.php|test 1

2017-01-12 01:26:41.411|ERROR|input_controller.php|chan31_w

2017-01-12 01:26:41.413|ERROR|input_controller.php|test 2

2017-01-12 01:26:41.414|ERROR|input_controller.php|

2017-01-12 01:26:41.748|ERROR|input_controller.php|Format error, json value is not numeric

 

Selecting all channel on the GEM "Data Post" page appears fix the problem.  But I think NodeLink should only be sending the selected channels to both the isy and emoncom.

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...