ramdom device communication issue

[stusviews]

What is the result if you turn thr scene on/off from the Admin Console? What is the result if you run a scene diagnostic selecting level 3?

[Techman]

I'm just asking questions about a problem I have right now. I use a motion detector that activates a lamp switch, but the scene don't work. I programmed an email alert when the motion sensor is activated. During movement I receive an e-mail activity. In addition, the lamp switch works via mobilic manually. Unfortunately, the scene between two devices does not work.

 

Could you help me to find what is my problem.

 

Right click on the Scene and run the scene test then copy and post the results

[autoperformance]

What is the result if you turn thr scene on/off from the Admin Console? What is the result if you run a scene diagnostic selecting level 3?

how are you do that ?

[autoperformance]

Right click on the Scene and run the scene test then copy and post the results

could you teach me how to do that. In trouble shooting I am a beginner.

 

Thank you

[stusviews]

Right click on the scene, select Diagnostics, change the Level to 3. When it's done, select Copy to Clipboard (clipboard icon). Paste the result to this forum.

[autoperformance]

Right click on the scene, select Diagnostics, change the Level to 3. When it's done, select Copy to Clipboard (clipboard icon). Paste the result to this forum.

I dont' see level 3 on diagnostics.

I have 3 choices. Show device link table

                            Show ISY link table

                            Querry Insteon engine.

[autoperformance]

The only thing I found It's the diagnostic Event level 3.

 

when the motion sensor is activated :

 

lun. 07/10/2017 23:55:42 : [iNST-SRX    ] 02 50 27.B6.56 3D.96.69 47 11 01    LTONRR (01)
lun. 07/10/2017 23:55:42 : [std-Cleanup ] 27.B6.56-->ISY/PLM Group=1, Max Hops=3, Hops Left=1
lun. 07/10/2017 23:55:42 : [D2D EVENT   ] Event [27 B6 56 1] [DON] [0] uom=0 prec=-1
lun. 07/10/2017 23:55:42 : [  27 B6 56 1]      DON   0
lun. 07/10/2017 23:55:42 : [D2D-CMP 0004] CTL [27 B6 56 1] DON op=1 Event(val=0 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true
lun. 07/10/2017 23:55:42 : [iNST-SRX    ] 02 50 27.B6.56 3D.96.69 47 11 01    LTONRR (01)
lun. 07/10/2017 23:55:42 : [std-Cleanup ] 27.B6.56-->ISY/PLM Group=1, Max Hops=3, Hops Left=1
lun. 07/10/2017 23:55:42 : [iNST-DUP    ] Previous message ignored.
lun. 07/10/2017 23:55:43 : [iNST-SRX    ] 02 50 27.B6.56 3D.96.69 47 11 01    LTONRR (01)
lun. 07/10/2017 23:55:43 : [std-Cleanup ] 27.B6.56-->ISY/PLM Group=1, Max Hops=3, Hops Left=1
lun. 07/10/2017 23:55:43 : [iNST-DUP    ] Previous message ignored.
lun. 07/10/2017 23:55:43 : [iNST-SRX    ] 02 50 27.B6.56 11.01.01 C7 06 00           (00)
lun. 07/10/2017 23:55:43 : [std-Group   ] 27.B6.56-->11.01.01, Max Hops=3, Hops Left=1
lun. 07/10/2017 23:55:43 : [iNST-INFO   ] Previous message ignored.
mar. 07/11/2017 00:05:41 : [        Time] 00:05:43 5(0)
 

[autoperformance]

Right click on the scene, select Diagnostics, change the Level to 3. When it's done, select Copy to Clipboard (clipboard icon). Paste the result to this forum.

lun. 07/17/2017 01:06:43 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 11 01    LTONRR (01)

lun. 07/17/2017 01:06:43 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:06:43 : [D2D EVENT   ] Event [27 B6 56 1] [DON] [1] uom=0 prec=-1

lun. 07/17/2017 01:06:43 : [  27 B6 56 1]      DON   1

lun. 07/17/2017 01:06:43 : [D2D-CMP 0004] CTL [27 B6 56 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true

lun. 07/17/2017 01:06:43 : [D2D EVENT   ] Event [27 B6 56 1] [sT] [255] uom=0 prec=-1

lun. 07/17/2017 01:06:43 : [  27 B6 56 1]       ST 255

lun. 07/17/2017 01:06:43 : [D2D-CMP 000A] STS [27 B6 56 1] ST op=6 Event(val=255 uom=0 prec=-1) != Condition(val=0 uom=0 prec=-1) --> true

lun. 07/17/2017 01:06:43 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 11 01    LTONRR (01)

lun. 07/17/2017 01:06:43 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:06:43 : [iNST-DUP    ] Previous message ignored.

lun. 07/17/2017 01:06:43 : [iNST-SRX    ] 02 50 27.B6.56 3D.96.69 41 11 01    LTONRR (01)

lun. 07/17/2017 01:06:43 : [std-Cleanup ] 27.B6.56-->ISY/PLM Group=1, Max Hops=1, Hops Left=0

lun. 07/17/2017 01:06:43 : [iNST-DUP    ] Previous message ignored.

lun. 07/17/2017 01:06:44 : [iNST-SRX    ] 02 50 27.B6.56 11.01.01 CB 06 00           (00)

lun. 07/17/2017 01:06:44 : [std-Group   ] 27.B6.56-->11.01.01, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:06:44 : [iNST-INFO   ] Previous message ignored.

lun. 07/17/2017 01:06:44 : [iNST-SRX    ] 02 50 27.B6.56 11.01.01 C7 06 00           (00)

lun. 07/17/2017 01:06:44 : [std-Group   ] 27.B6.56-->11.01.01, Max Hops=3, Hops Left=1

lun. 07/17/2017 01:06:44 : [iNST-INFO   ] Previous message ignored.

lun. 07/17/2017 01:06:44 : [iNST-TX-I1  ] 02 62 23 5D D2 0F 11 00

lun. 07/17/2017 01:06:44 : [iNST-ACK    ] 02 62 23.5D.D2 0F 11 00 06          LTONRR (00)

lun. 07/17/2017 01:06:45 : [iNST-SRX    ] 02 50 23.5D.D2 3D.96.69 2B 11 00    LTONRR (00)

lun. 07/17/2017 01:06:45 : [std-Direct Ack] 23.5D.D2-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:06:48 : [iNST-TX-I1  ] 02 62 23 5D D2 0F 13 00

lun. 07/17/2017 01:06:48 : [iNST-ACK    ] 02 62 23.5D.D2 0F 13 00 06          LTOFFRR(00)

lun. 07/17/2017 01:06:49 : [iNST-SRX    ] 02 50 23.5D.D2 3D.96.69 27 13 00    LTOFFRR(00)

lun. 07/17/2017 01:06:49 : [std-Direct Ack] 23.5D.D2-->ISY/PLM Group=0, Max Hops=3, Hops Left=1

lun. 07/17/2017 01:07:43 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 13 01    LTOFFRR(01)

lun. 07/17/2017 01:07:43 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:07:43 : [D2D EVENT   ] Event [27 B6 56 1] [DOF] [1] uom=0 prec=-1

lun. 07/17/2017 01:07:43 : [  27 B6 56 1]      DOF   1

lun. 07/17/2017 01:07:43 : [D2D EVENT   ] Event [27 B6 56 1] [sT] [0] uom=0 prec=-1

lun. 07/17/2017 01:07:43 : [  27 B6 56 1]       ST   0

lun. 07/17/2017 01:07:43 : [D2D-CMP 000A] STS [27 B6 56 1] ST op=6 Event(val=0 uom=0 prec=-1) != Condition(val=0 uom=0 prec=-1) --> false

lun. 07/17/2017 01:07:43 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 13 01    LTOFFRR(01)

lun. 07/17/2017 01:07:43 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:07:43 : [iNST-DUP    ] Previous message ignored.

lun. 07/17/2017 01:07:43 : [iNST-SRX    ] 02 50 27.B6.56 3D.96.69 41 13 01    LTOFFRR(01)

lun. 07/17/2017 01:07:43 : [std-Cleanup ] 27.B6.56-->ISY/PLM Group=1, Max Hops=1, Hops Left=0

lun. 07/17/2017 01:07:43 : [iNST-DUP    ] Previous message ignored.

lun. 07/17/2017 01:07:43 : [iNST-SRX    ] 02 50 27.B6.56 13.01.01 CB 06 00           (00)

lun. 07/17/2017 01:07:43 : [std-Group   ] 27.B6.56-->13.01.01, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:07:43 : [iNST-INFO   ] Previous message ignored.

lun. 07/17/2017 01:07:44 : [iNST-SRX    ] 02 50 27.B6.56 13.01.01 CB 06 00           (00)

lun. 07/17/2017 01:07:44 : [std-Group   ] 27.B6.56-->13.01.01, Max Hops=3, Hops Left=2

lun. 07/17/2017 01:07:44 : [iNST-INFO   ] Previous message ignored.

 

[Techman]

If your right click on the name of the scene you're having trouble with  you'll see DIAGNOSTICS. Under DIAGNOSTICS Click on SCENE TEST.

Copy and paste the results of the scene test in a post

 

You should add a FILTERLINC noise filter between your UPS and the poiwerline. The power supply in the UPS can interfere with the Insteon signals. It's OK to plug the ISY into the UPS but not the PLM.

 

This is a link to the filterlinc.  http://www.smarthome.com/filterlinc-10-amp-plug-in-noise-filter.html

[Brian H]

I have my UPS on the filtered outlet of a FilterLinc and the PLM in the front pass through unfiltered outlet. ISY994i power supply is on the UPS AC output.

 

UPS AC power line condition will absorb a large amount of the Insteon Power Line commands as noise.

Many filtered surge strips can also be absorb power line signal .

[autoperformance]

If your right click on the name of the scene you're having trouble with you'll see DIAGNOSTICS. Under DIAGNOSTICS Click on SCENE TEST.

Copy and paste the results of the scene test in a post

 

You should add a FILTERLINC noise filter between your UPS and the poiwerline. The power supply in the UPS can interfere with the Insteon signals. It's OK to plug the ISY into the UPS but not the PLM.

 

This is a link to the filterlinc. http://www.smarthome.com/filterlinc-10-amp-plug-in-noise-filter.html

I disconnect the UPS and I add a filterlinc already.

I don't really have scene... it's just a program who said between 9h45 pm and 6 am if the motion sensor is activated, turn on the lamp switch. The motion sensor send me email notification too. So I don't understand why the motion sensor is activated because I received notification...but the lampswitch don't turn on! At first sight it's seem to be lampswitch problem, but with my smartphone with the mibilinc app I can turn On with no problem.

[Techman]

I disconnect the UPS and I add a filterlinc already.

I don't really have scene... it's just a program who said between 9h45 pm and 6 am if the motion sensor is activated, turn on the lamp switch. The motion sensor send me email notification too. So I don't understand why the motion sensor is activated because I received notification...but the lampswitch don't turn on! At first sight it's seem to be lampswitch problem, but with my smartphone with the mibilinc app I can turn On with no problem.

 

Post a copy of the program that you're referring to.

[autoperformance]

Post a copy of the program that you're referring to.

BackYard - [iD 000A][Parent 0001][Run At Startup]

If

        From     9:45:00PM

        To       5:58:00AM (next day)

    And Status  'Motion Sensor' is not Off

 

Then

        Set 'Torch Lamp 2' On

        Wait  60 seconds

        Set 'Torch Lamp 2' Off

        Repeat Every 120 seconds

 

Else

   - No Actions - (To add one, press 'Action')

[Techman]

BackYard - [iD 000A][Parent 0001][Run At Startup]

If

        From     9:45:00PM

        To       5:58:00AM (next day)

    And Status  'Motion Sensor' is not Off

 

Then

        Set 'Torch Lamp 2' On

        Wait  60 seconds

        Set 'Torch Lamp 2' Off

        Repeat Every 120 seconds

 

Else

   - No Actions - (To add one, press 'Action')

 

 

You've got me confused.

 

In one of your previous posts, #25,  you refer to a SCENE that doesn't work. Now you're saying a program doesn't work.

 

In your program there's no notification line. how are you sending the email notification?

 

What exactly do you want the TORCH LAMP to do?

[stusviews]

"Repeat" should precede the statements you want repeated. As it is now, nothing follows your Repeat command, so nothing is repeated.

[autoperformance]

Sorry for the mistake.

 

For the notification I put that in the Email/Notification tabs.

[autoperformance]

BackYard - [iD 000A][Parent 0001][Run At Startup]

If
        From     9:45:00PM
        To       5:58:00AM (next day)
    And Status  'Motion Sensor' is not Off
 
Then
        Repeat Every  120 seconds
           Set 'Torch Lamp 2' On
           Wait  60 seconds
           Set 'Torch Lamp 2' Off
 
Else
   - No Actions - (To add one, press 'Action')
 

[autoperformance]

"Repeat" should precede the statements you want repeated. As it is now, nothing follows your Repeat command, so nothing is repeated.

That explane why when I reboot the ISY the program work once and don't work after that

[autoperformance]

I just making the modification to the program, but don't seem to work.

[autoperformance]

I don't know if the device event can help you.

 

lun. 07/17/2017 14:09:28 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 11 01    LTONRR (01)
lun. 07/17/2017 14:09:28 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2
lun. 07/17/2017 14:09:28 : [D2D EVENT   ] Event [27 B6 56 1] [DON] [1] uom=0 prec=-1
lun. 07/17/2017 14:09:28 : [  27 B6 56 1]      DON   1
lun. 07/17/2017 14:09:28 : [D2D-CMP 0004] CTL [27 B6 56 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true
lun. 07/17/2017 14:09:28 : [D2D EVENT   ] Event [27 B6 56 1] [sT] [255] uom=0 prec=-1
lun. 07/17/2017 14:09:28 : [  27 B6 56 1]       ST 255
lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 11 01    LTONRR (01)
lun. 07/17/2017 14:09:29 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2
lun. 07/17/2017 14:09:29 : [iNST-DUP    ] Previous message ignored.
lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 3D.96.69 41 11 01    LTONRR (01)
lun. 07/17/2017 14:09:29 : [std-Cleanup ] 27.B6.56-->ISY/PLM Group=1, Max Hops=1, Hops Left=0
lun. 07/17/2017 14:09:29 : [iNST-DUP    ] Previous message ignored.
lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 11.01.01 CF 06 00           (00)
lun. 07/17/2017 14:09:29 : [std-Group   ] 27.B6.56-->11.01.01, Max Hops=3, Hops Left=3
lun. 07/17/2017 14:09:29 : [iNST-INFO   ] Previous message ignored.
lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 11.01.01 CB 06 00           (00)
lun. 07/17/2017 14:09:29 : [std-Group   ] 27.B6.56-->11.01.01, Max Hops=3, Hops Left=2
lun. 07/17/2017 14:09:29 : [iNST-INFO   ] Previous message ignored.
 

[Techman]

I don't know if the device event can help you.

 

lun. 07/17/2017 14:09:28 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 11 01    LTONRR (01)

lun. 07/17/2017 14:09:28 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2

lun. 07/17/2017 14:09:28 : [D2D EVENT   ] Event [27 B6 56 1] [DON] [1] uom=0 prec=-1

lun. 07/17/2017 14:09:28 : [  27 B6 56 1]      DON   1

lun. 07/17/2017 14:09:28 : [D2D-CMP 0004] CTL [27 B6 56 1] DON op=1 Event(val=1 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true

lun. 07/17/2017 14:09:28 : [D2D EVENT   ] Event [27 B6 56 1] [sT] [255] uom=0 prec=-1

lun. 07/17/2017 14:09:28 : [  27 B6 56 1]       ST 255

lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 00.00.01 CB 11 01    LTONRR (01)

lun. 07/17/2017 14:09:29 : [std-Group   ] 27.B6.56-->Group=1, Max Hops=3, Hops Left=2

lun. 07/17/2017 14:09:29 : [iNST-DUP    ] Previous message ignored.

lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 3D.96.69 41 11 01    LTONRR (01)

lun. 07/17/2017 14:09:29 : [std-Cleanup ] 27.B6.56-->ISY/PLM Group=1, Max Hops=1, Hops Left=0

lun. 07/17/2017 14:09:29 : [iNST-DUP    ] Previous message ignored.

lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 11.01.01 CF 06 00           (00)

lun. 07/17/2017 14:09:29 : [std-Group   ] 27.B6.56-->11.01.01, Max Hops=3, Hops Left=3

lun. 07/17/2017 14:09:29 : [iNST-INFO   ] Previous message ignored.

lun. 07/17/2017 14:09:29 : [iNST-SRX    ] 02 50 27.B6.56 11.01.01 CB 06 00           (00)

lun. 07/17/2017 14:09:29 : [std-Group   ] 27.B6.56-->11.01.01, Max Hops=3, Hops Left=2

lun. 07/17/2017 14:09:29 : [iNST-INFO   ] Previous message ignored.

 

 

In order to receive an email notification, you must include it in a program. Do you have another program that sends you an email?

 

What exactly do you want your TORCH LAMP to do?. 

[autoperformance]

In order to receive an email notification, you must include it in a program. Do you have another program that sends you an email?

 

What exactly do you want your TORCH LAMP to do?. 

Torch Lamp activate an 120v alarm buzzer. I have some problem with wild animal.

 

For my email notification I don't know how to include it in a program, so I just use the email/notification option in the admin console.

[Techman]

Torch Lamp activate an 120v alarm buzzer. I have some problem with wild animal.

 

For my email notification I don't know how to include it in a program, so I just use the email/notification option in the admin console.

 

You need to include this line in your Then statement.

        Send Notification to 'NAME OF YOUR EMAIL' content YOUR CUSTOM MESSAGE'   This assumes you properly configured your email notifications.

 

When your motion sensor turns off your program will stop. The THEN clause will only run while all the items in your IF statement are true.

 

If your want your program to continue to run after the motion sensor turns off then put the contents of your THEN statement into a 2nd program and have the first program run the THEN statement of the 2nd program.

[autoperformance]

You need to include this line in your Then statement.

        Send Notification to 'NAME OF YOUR EMAIL' content YOUR CUSTOM MESSAGE'   This assumes you properly configured your email notifications.

 

When your motion sensor turns off your program will stop. The THEN clause will only run while all the items in your IF statement are true.

 

If your want your program to continue to run after the motion sensor turns off then put the contents of your THEN statement into a 2nd program and have the first program run the THEN statement of the 2nd program.

ok thank you

 

I change the torch lamp on by torch lamp fast On, and the program start to work again. I can't explaned why.

[Techman]

ok thank you

 

I change the torch lamp on by torch lamp fast On, and the program start to work again. I can't explaned why.

 

Are you using a dimmer switch to turn on a buzzer?

 

What model switch and what model buzzer are you using?