austin_john Posted August 12, 2017 Posted August 12, 2017 Hi - I have had an Insteon/ISY system installed for a couple years and all has worked well until a few months ago, when on KP stopped responding. I tried Restoring the device, resetting to factory settings and then writing updates/restoring and nothing worked. Since I am adding Echo to the system, I finally had to take the time to take the dual gang apart and re-tighten/test all the connections - and it seems to have helped. Now I can get the 4 middle KP switches to control their respective scenes, but (1) the primary light is not operating correctly (I can turn it on/off by the TOP KP switch only - bottom KP switch does not do anything) and (2) the top and bottom larger buttons seem to "8-button KP mode" since the two lights for each switch will light independently depending on which part of button is pressed **** Update - I did another factory reset (I don't remember how many I have done) and it works properly - sometimes. After hitting KP "D" one time, the KP made a short buzz and both the "D" KP and "Bottom/Off" KP stayed lit. I did another reset and its working, for now.
stusviews Posted August 12, 2017 Posted August 12, 2017 Start thinking about a replacement. BTW, is the KPL in question a 6/5-button KPL or was it originally an 8-button KPL?
oberkc Posted August 12, 2017 Posted August 12, 2017 +1 on concern that keypad was originally 8-button version. Depending on how much work, you could remove from ISY, perform a factory reset (again) and re-add. When doing so, does it show up as 8-button? Inability to turn off load from lower buttons suggest to me an issue with the device, itself.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.