bbroge Posted November 13, 2017 Posted November 13, 2017 Hello, I'm not sure if this is common among any INSTEON device replacement, but I replaced my fanlinc over the weekend using the right click "replace with" option for the first time. My fanlinc was linked to my insteon keypad. This continued to operate as normal after the replacement, fan and light modes worked. However none of my scenes worked. When running them it would reflect that the light or mode was switched in the status, however it really didn't actually turn on the light or switch the fan to low speed, as would the keypad. When I ran scene diagnostics it would fail. Is there something else I need to do? Sat 11/11/2017 08:29:44 PM : [GRP-RX ] 02 61 11 13 00 06 Sat 11/11/2017 08:29:44 PM : [iNST-SRX ] 02 50 40.18.D0 30.DA.E2 E5 13 FF LTOFFRR(FF) Sat 11/11/2017 08:29:44 PM : [CLEAN-UP-RPT] 02 58 06 Sat 11/11/2017 08:29:44 PM : [iNST-SRX ] 02 50 40.18.D0 30.DA.E2 E1 13 FF LTOFFRR(FF) Sat 11/11/2017 08:29:44 PM : [iNST-SRX ] 02 50 34.64.01 30.DA.E2 65 13 11 LTOFFRR(11) Sat 11/11/2017 08:29:44 PM : [std-Cleanup Ack] 34.64.01-->ISY/PLM Group=0, Max Hops=1, Hops Left=1 <html><font color="red">----- MasterBedroom Test Results -----</font></html> <html><font color="red">[succeeded]</font> MasterBedroomOnOff (34 64 1 1)</html> <html><font color="red">[Failed]</font> 3F.B6.45-Light (40 18 D0 1)</html> <html><font color="red">----- MasterBedroom Test Results -----</font></html> Sat 11/11/2017 08:29:52 PM : [iNST-TX-I1 ] 02 62 00 00 11 CF 13 00 Sat 11/11/2017 08:29:52 PM : [iNST-ACK ] 02 62 00.00.11 CF 13 00 06 LTOFFRR(00)
stusviews Posted November 13, 2017 Posted November 13, 2017 Try Restore Device followed by Write Updates to device.
bbroge Posted November 14, 2017 Author Posted November 14, 2017 That seemed to take care of it. Thank you!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.