Why Does Echo Say Security Not Responding?

[smokegrub]

I have the following two programs that turn on cameras and notifications from door sensors. When I try to include the first program the portal setup for Alexa it is recognized as a Scene. Second, when I tell Alexa to turn Security on, I get the message "Security is not responding". What am I doing wrong? My understanding is that an On command should result in Then running and an Off command should result in Else running.

 

Security - [iD 0011][Parent 001C]

 

If

        Status  'KPLs / Kitchen KPL / Kitchen KPL D (Security)' is 100%

     Or Status  'KPLs / Deck KPL / Deck KPL D (Security)' is 100%

 

Then

        Wait  2 minutes 

        Set 'Cameras / Kitchen Camera (On-Off)' On

        Set 'Cameras / Front Camera (On-Off)' On

        Wait  3 minutes 

        Enable Program 'Security (Disabled)'

 

Else

        Disable Program 'Security (Disabled)'

        Set 'Cameras / Front Camera (On-Off)' Off

        Wait  2 seconds

        Set 'Cameras / Kitchen Camera (On-Off)' Off

 

Security (Disabled) - [iD 0012][Parent 001C][Not Enabled]

 

If

        Control 'Sensors (Door) / Front Door Sensor / Front Door Sensor-Opened' is switched On

     Or Control 'Sensors (Door) / Deck Door Sensor' is switched On

     Or Control 'Sensors (Door) / Garage Side Door Sensor' is switched On

     Or Control 'Sensors (Door) / Kitchen Door Sensor' is switched On

     Or Control 'Sensors (Door) / Man Cave Door Sensor' is switched On

 

Then

        Send Notification to 'Donnie Wheeler' content 'Chesapeake Door Open'

 

Else

   - No Actions - (To add one, press 'Action')

[smokegrub]

I solved this. There was nothing wrong with the programs or their execution. I had not asked Alexa to discover new devices after adding this program. Please be patient with me. I am learning something new.