jzh Posted May 26, 2019 Share Posted May 26, 2019 HI, my 2844-222 can only sense about 2-3 meters distance. The document said it can reach 40feet. Does anyone have the same issue? thanks Link to comment
jzh Posted May 26, 2019 Author Share Posted May 26, 2019 And my old MS 2842-222 can sense about 10 meters. Link to comment
simplextech Posted May 26, 2019 Share Posted May 26, 2019 Have you checked the dip switch for sensitivity? https://cache.insteon.com/documentation/2842-222-en.pdf Jumper 1 – Sensitivity To reduce sensor’s detection range by approximately 33%, use needle-nose pliers to carefully remove Jumper 1 (the left-most jumper) from the single pin it is installed on and reinstall it on both pins. Tap the set button once, wait 10 seconds and activate motion to establish the new setting. Link to comment
simplextech Posted May 26, 2019 Share Posted May 26, 2019 1 hour ago, jzh said: Mine are motion sensor II You listed both so it's a bit confusing in the morning before a pot of coffee. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.