My programs were not working so did a "restore devices" to get my programs working again and I thought was doing well. except when my wife let me know the water is turned off!

I turn the water back on and then it turns itself back off. I've disabled all the programs and it's still happening. I grabbed the log from when I press turn the water on to after it turns itself off but I still can't figure it out. Can anyone else tell what this log is saying? 3D 4E 58 1 is my shutoff valve.

(turn water on in the ISY admin console)

Mon 05/27/2019 03:24:32 PM : [INST-TX-I1  ] 02 62 3D 4E 58 0F 11 02
Mon 05/27/2019 03:24:32 PM : [INST-ACK    ] 02 62 3D.4E.58 0F 11 02 06          LTONRR (02)
Mon 05/27/2019 03:24:32 PM : [INST-SRX    ] 02 50 3D.4E.58 39.02.4D 2F 11 02    LTONRR (02)
Mon 05/27/2019 03:24:32 PM : [Std-Direct Ack] 3D.4E.58-->ISY/PLM Group=0, Max Hops=3, Hops Left=3
Mon 05/27/2019 03:24:33 PM : [INST-SRX    ] 02 50 3D.4E.58 00.00.01 CF 11 00    LTONRR (00)
Mon 05/27/2019 03:24:33 PM : [Std-Group   ] 3D.4E.58-->Group=1, Max Hops=3, Hops Left=3
Mon 05/27/2019 03:24:33 PM : [D2D EVENT   ] Event [3D 4E 58 1] [DON] [0] uom=0 prec=-1
Mon 05/27/2019 03:24:33 PM : [  3D 4E 58 1]      DON   0
Mon 05/27/2019 03:24:33 PM : [D2D EVENT   ] Event [3D 4E 58 1] [ST] [255] uom=0 prec=-1
Mon 05/27/2019 03:24:33 PM : [  3D 4E 58 1]       ST 255
Mon 05/27/2019 03:24:33 PM : [INST-SRX    ] 02 50 3D.4E.58 39.02.4D 45 11 01    LTONRR (01)
Mon 05/27/2019 03:24:33 PM : [Std-Cleanup ] 3D.4E.58-->ISY/PLM Group=1, Max Hops=1, Hops Left=1
Mon 05/27/2019 03:24:33 PM : [INST-DUP    ] Previous message ignored.

(a half second passes then this happens)
Mon 05/27/2019 03:24:33 PM : [INST-SRX    ] 02 50 3D.4E.58 11.01.01 CF 06 00           (00)
Mon 05/27/2019 03:24:33 PM : [Std-Group   ] 3D.4E.58-->11.01.01, Max Hops=3, Hops Left=3
Mon 05/27/2019 03:24:33 PM : [INST-INFO   ] Previous message ignored.
Mon 05/27/2019 03:24:36 PM : [INST-SRX    ] 02 50 3D.4E.58 00.00.01 CF 13 00    LTOFFRR(00)
Mon 05/27/2019 03:24:36 PM : [Std-Group   ] 3D.4E.58-->Group=1, Max Hops=3, Hops Left=3
Mon 05/27/2019 03:24:36 PM : [D2D EVENT   ] Event [3D 4E 58 1] [DOF] [0] uom=0 prec=-1
Mon 05/27/2019 03:24:36 PM : [  3D 4E 58 1]      DOF   0
Mon 05/27/2019 03:24:36 PM : [D2D EVENT   ] Event [3D 4E 58 1] [ST] [0] uom=0 prec=-1
Mon 05/27/2019 03:24:36 PM : [  3D 4E 58 1]       ST   0
Mon 05/27/2019 03:24:36 PM : [INST-SRX    ] 02 50 3D.4E.58 39.02.4D 45 13 01    LTOFFRR(01)
Mon 05/27/2019 03:24:36 PM : [Std-Cleanup ] 3D.4E.58-->ISY/PLM Group=1, Max Hops=1, Hops Left=1
Mon 05/27/2019 03:24:36 PM : [INST-DUP    ] Previous message ignored.
Mon 05/27/2019 03:24:37 PM : [INST-SRX    ] 02 50 3D.4E.58 13.01.01 CF 06 00           (00)
Mon 05/27/2019 03:24:37 PM : [Std-Group   ] 3D.4E.58-->13.01.01, Max Hops=3, Hops Left=3
Mon 05/27/2019 03:24:37 PM : [INST-INFO   ] Previous message ignored.
 

I still don't understand what happened but when I changed the "Momentary hold time" from 2.2 to 0.0 it seemed to fix itself and also reset itself to 2.2 but it's still working correctly.

 

What module are you using to control the water valve? That will help in getting you a clearer answer.

Of course!

Sorry, had frantic family running around.

ISY994i (1120)

I'm running 4.7.3 now but I just updated it AFTER it started working correctly again.

Thanks for the ISY994i model number.

What module is the one being controlled by the ISY994i? Like a 2450 I/OLinc maybe?

oh, yes sorry. 2450 iOLink v.41