Just installed 4 Lamplinc Dimmers in a Master Bedroom.  They are plugged into a single power bar.  The light emitting from the status LEDs is bothering my sleep.  How do I dim the status LED on a Lamplinc using ISY?  The  On/Off modules have tabs to accomplish this but not the Lamplincs.

Thanks

PhanTomiZ

https://www.lightdims.com/index.php

I use these on a LOT of my devices, although not so much on the insteon ones (the while LEDs are not so "eye-piercing" as the blue ones... the blue one on the ISY is blinding.)

Thanks for the prompt response, but I was hoping I missed something and was able to do it through the ISY as I do with the On/Off modules.

The manual does not show a software only option. For the LED brightness. Possible it can not be done through the ISY994i controller.

In the full users manual. In the Local Programming Flow Chart. There is a sequence to adjust the LED brightness. You may want to try it and see if it could possibly be of some help.

I have used the Light Dims product to dim my bright Blue LED on the ISY994i. It is a set of stickers of assorted size and shapes. You can stick over things like LEDs. I believe mine where the 80% blocking ones. They do have a 100% blockage one also.

http://www.lightdims.com/index.php

Edited June 4, 20196 yr by Brian H
Add Information.