RatRanch Posted August 31, 2009 Share Posted August 31, 2009 Hi all, When my ISY-99i starts, I'm seeing the following log entries: 0 null Mon 08/31/2009 09:25:52 AM System Start 0 /CONF/A Mon 08/31/2009 09:25:59 AM System -110022 0 /CONF/F Mon 08/31/2009 09:25:59 AM System -110022 The error code appears to indicate missing or damaged files. Is this any cause for concern? If so, how to correct? Thanks, -Jim Link to comment
Michel Kohanim Posted August 31, 2009 Share Posted August 31, 2009 Hi Jim, I think they are related removed devices which were removed but the associated configuration files were not removed. Quick questions before applying the procedure to fix: 1. Do you have any of your scene which cannot be programmed (on level/ramp rate)? 2. Do you have any of your devices which are not operating properly and/or are missing? If the answer to both of these questions is NO, then please: 1. Telnet to your ISY 2. Login 3. Issue FN (Fix Nodes) With kind regards, Michel Link to comment
RatRanch Posted September 1, 2009 Author Share Posted September 1, 2009 Hi Jim, I think they are related removed devices which were removed but the associated configuration files were not removed. Quick questions before applying the procedure to fix: 1. Do you have any of your scene which cannot be programmed (on level/ramp rate)? 2. Do you have any of your devices which are not operating properly and/or are missing? If the answer to both of these questions is NO, then please: 1. Telnet to your ISY 2. Login 3. Issue FN (Fix Nodes) With kind regards, Michel Hi Michel, Thanks for your prompt response. AFAIK, the answer to both questions is no, so I went ahead and ran the FN command. It reported that several files with the extension UND were fixed and rebooted the ISY. However, I'm still seeing the same errors involving /CONF/A and /CONF/F in the log file. Anything else to check? I can back up the ISY and all devices are working normally, so the only concern is that the file system inconsistency might cause trouble in the future. Thanks, -Jim Link to comment
Michel Kohanim Posted September 1, 2009 Share Posted September 1, 2009 Ah, I am so very sorry! Those are configuration files for Open Auto DR and Flex Your Power (under Electricity tab). Since you have not configured them, it's just a warning that the modules could not be initialized. So very sorry for the wrong answer! With kind regards, Michel Link to comment
RAldridge Posted September 2, 2009 Share Posted September 2, 2009 Ah, I am so very sorry! Those are configuration files for Open Auto DR and Flex Your Power (under Electricity tab). Since you have not configured them, it's just a warning that the modules could not be initialized. So very sorry for the wrong answer! With kind regards, Michel Hi Michel, What about /CONF/E? I see this also in my log? Thanks, Ruben Link to comment
Michel Kohanim Posted September 3, 2009 Share Posted September 3, 2009 Hello Mr. Aldridge, E is for energy ... simply add a price under the electricity tab. With kind regards, Michel Ah, I am so very sorry! Those are configuration files for Open Auto DR and Flex Your Power (under Electricity tab). Since you have not configured them, it's just a warning that the modules could not be initialized. So very sorry for the wrong answer! With kind regards, Michel Hi Michel, What about /CONF/E? I see this also in my log? Thanks, Ruben Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.