fahrer16 Posted August 8, 2020 Share Posted August 8, 2020 I recently had a storm roll through that knocked out power. When my Polisy came back I could log into the web interface but nothing really worked. After some troubleshooting it turns out the disk was 100% full, 0B free. I ran a 'pkg clean' to free up enough space to get up and running again but is there a way to increase the disk size? I don't really have much installed, just a couple of basic node servers and I'm pretty close to filling up the 5GB disk: [admin@polisy ~]$ df -h Filesystem Size Used Avail Capacity Mounted on zudi/ROOT/default 5.0G 4.8G 217M 96% / devfs 1.0K 1.0K 0B 100% /dev procfs 4.0K 4.0K 0B 100% /proc zudi/tmp 217M 26K 217M 0% /tmp zudi/usr/home 221M 3.7M 217M 2% /usr/home zudi/var/crash 217M 23K 217M 0% /var/crash zudi/var/db 413M 196M 217M 47% /var/db zudi/var/db/pkg 224M 6.5M 217M 3% /var/db/pkg zudi/var/empty 217M 23K 217M 0% /var/empty zudi/var/log 218M 810K 217M 0% /var/log zudi/var/run 217M 48K 217M 0% /var/run zudi/var/tmp 217M 23K 217M 0% /var/tmp zudi 217M 23K 217M 0% /zudi Link to comment Share on other sites More sharing options...
MrBill Posted August 8, 2020 Share Posted August 8, 2020 are there different sizes for polisy? [admin@polisy ~]$ df -h Filesystem Size Used Avail Capacity Mounted on zudi/ROOT/default 25G 3.3G 21G 13% / devfs 1.0K 1.0K 0B 100% /dev procfs 4.0K 4.0K 0B 100% /proc zudi 21G 23K 21G 0% /zudi zudi/tmp 21G 25K 21G 0% /tmp zudi/var/db 22G 306M 21G 1% /var/db zudi/usr/home 21G 350K 21G 0% /usr/home zudi/var/log 21G 320K 21G 0% /var/log zudi/var/run 21G 49K 21G 0% /var/run zudi/var/empty 21G 23K 21G 0% /var/empty zudi/var/crash 21G 23K 21G 0% /var/crash zudi/var/tmp 21G 23K 21G 0% /var/tmp zudi/var/db/pkg 21G 7.1M 21G 0% /var/db/pkg Link to comment Share on other sites More sharing options...
mwester Posted August 8, 2020 Share Posted August 8, 2020 I believe all of them have 32GB mSATA SSDs. However. the early batches had them formatted and partitioned down to 8GB. There's a means to convert the file system to use the full 32GB -- open a support ticket with UDI. (I had to do this on mine, but I'm not certain that the commands I used are current, and it's not worth risking -- best to check with UDI to get the correct sequence to fix this.) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.