My old PLM finally started to die and I've replaced it with a v2.4 that I had already purchased.  I have been writing changes to all my battery devices and all are done except one mini remote that keeps failing with the exact same error every time I try.

e 08/18/2020 12:07:40 PM : [1C 47 E2 1  ] Memory : Write dbAddr=0x1005 [0E] cmd1=0x20 cmd2=0x0E
Tue 08/18/2020 12:07:40 PM : [INST-TX-I1  ] 02 62 1C 47 E2 0F 20 0E
Tue 08/18/2020 12:07:40 PM : [INST-ACK    ] 02 62 1C.47.E2 0F 20 0E 06                 (0E)
Tue 08/18/2020 12:07:49 PM : [INST-TX-I1  ] 02 62 1C 47 E2 0F 20 0E
Tue 08/18/2020 12:07:49 PM : [INST-ACK    ] 02 62 1C.47.E2 0F 20 0E 06                 (0E)
Tue 08/18/2020 12:07:50 PM : [ZWAVE-RX ZW041_1] [32/02] CC=0x32 cmd=0x02 [21640194205B007701941FFF] ACK,AUTO,EXPLORE From=0x29
Tue 08/18/2020 12:07:58 PM : [INST-TX-I1  ] 02 62 1C 47 E2 0F 20 0E
Tue 08/18/2020 12:07:58 PM : [INST-ACK    ] 02 62 1C.47.E2 0F 20 0E 06                 (0E)
Tue 08/18/2020 12:08:02 PM : [1C 47 E2 1  ] Memory : Write dbAddr=0x1005 [0E] cmd1=0x20 cmd2=0x0E - Failed

I am preforming the updates the same way I did with everything in the same location and this one consistently fails.  I've also tried starting over with a restore device, then tried factory reset followed by restore device, all fail in the exact same line.

 

Do you have any idea where the ZWAVE message in the middle of the messages is coming from?

Sorry, I forget to mention there were other things happening in the log, I just removed them, and missed one. Yes, ZW 41 is a power usage monitor.


Sent from my Pixel 3 XL using Tapatalk

Sorry my bad, I guess that error means, hey dummy you are trying to write changes to the wrong device   That's what happens when you have to many remotelincs...

 

I would think at one time. Many of us have gotten the address wrong.  Like was that a 0 or a D.

Some of the Mini Remotes had labels the addresses got worn off. I personally own one myself.