Flood Light Scenario

[aanthony]

Is there an easier way than creating 5 folder/programs for the following scenario? SW1 controls a porch light and FL1, FL2 control two different sets of floodlights. I want the following to happen:

1. Daytime(Sunrise to Sunset) -> if SW1 turned on -> wait 1 min and turn off (turned on accidentally).

2. Sunset to 11:00PM -> if SW1 turned on -> turn on porch light, flood1 and flood2 -> wait 20 min -> turn off porch, flood1 and flood2.

3. 11:31PM to Sunrise next -> if SW1 turned on -> turn on porch, flood1 and flood2 -> wait 20 min -> turn off ONLY porch

4. Sunset to 11:30 -> if SW1 turned off -> turn off porch and floods

5. 11:31 to Sunrise next -> if SW1 turned off -> turn off porch only.

 

Thanks in advance

[Chris Jahn]

I think it is simplest to use 5 programs to do this. You don't need any new folders for this, although you might want to put them all in one folder just to keep things organized.

[upstatemike]

In program 1, why wait 1 min? Why not just turn it back off immediately?

[aanthony]

Good point.