bcfromva Posted September 25, 2021 Share Posted September 25, 2021 As Insteon appears to be on the way out, I am trying to replace my Insteon devices with Z-wave devices. I bought several GE Z-wave Plus Dimmers (47338). I was able to get my ISY to recognize them after much trial and error. I am currently trying to change the parameters in the dimmer so the ramp up/down time is faster. However, when I query any parameters it returns a value of 0, and when I try to set the parameter, it remains 0. According to this: https://ezzwave.com/support/advanced-configuration there should be parameters with non-zero defaults, but everything I query is zero. I have no idea how to change any of the parameters and the default ramp-up time is ridiculously slow. Can anyone offer some insight? The other Z-wave Plus device I have is a Multisensor 6, and I am able to change those parameters with no issues at all. Thanks in advance. Link to comment Share on other sites More sharing options...
Recommended Posts