Jump to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

After Polisy - Insteon Signals Are Bad

Featured Replies

Posted

Hello,

Since my last serial modem, PLM, went bad.  I jumped to the POLISY to use the USB PLM.  Well over this month, communication is very poor.  Not sure what it is.  I have tried to filter my house with the old filters for refridges and other motor-type aparatus.  The outlets I am trying to control are literally 8 feet away from the circuit panel, with my USB PLM from the Polisy, another 8 feet.  I just don't know what to do about the spriratic Insteon communications.

What amps or other filters are out there - they seem very limited.  Or is the Polisy not the best way to generate insteon communication?

Karl

If your previous PLM was plugged into the same outlet as the USB PLM then you shouldn't really notice any difference between the two assuming nothing else has changed on your electrical circuits.

Another option is to take the RS232 board (i.e. the daughter board) out of your Old PLM and install it in the USB PLM and then continue to use the ISY994.

The Polisy is still in the development stage, not sure if that would have any effect on your issue.

Guest
This topic is now closed to further replies.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.