Ramp Rate on KPL Relay Secondary Buttons

[ResIpsa]

I have an 8-button KPL relay which controls my landscape lights (button A). Button B has, for at least two years, been a controller of the "Family Room Lights-Full" scene in my family room. That scene includes three LampLincs as responders, and a secondary button on a KPL dimmer in another location as a controller.

 

I have been applying the ISY alpha builds, and and have been on 2.7.8. After replacing one of the older LampLincs in my family room with a new Dual-Band LampLinc Dimmer, I checked the on levels/ramp rates in the scene and discovered that the ramp rate on the KPL dimmer is greyed out (remember, this is button B, not the load). I'm 99.9% sure that the ramp rate on the secondary buttons on the KPL Relay used to be adjustable.

 

I tried the following fixes, all of which were unsuccessful:

• Query the KPL Relay
  Restore the KPL Relay
  Remove the KPL Relay from the scene and add it back
  Upgrade to 2.7.9 Alpha.

Any suggestions?

[Michel Kohanim]

Hi Tim,

 

Even if ramp rates on the secondary buttons were adjustable it must have been a bug since secondary buttons do not have any on level/ramp rate associated with them.

 

If you are talking about ramp rates/on level for devices responding to a secondary button, then that must be a bug. Is this the case only for your LL?

 

With kind regards,

Michel