asbril Posted August 4, 2022 Posted August 4, 2022 For those that have me helped along the road and those that have followed my "Zwave struggles".... I have just completed 99 % of the migration from ISY to IoP. There are only a few sensors left and those are easy to transfer. Now I have a lot of programming to do, but that will keep me busy a few days. At first I wanted to wait for the migration tool that, I think, is coming sometime around September, but I have a bug in my ISY that I have not been able to identify and resolve, and I was afraid that a migration tool might bring this bug along. It took me several days, a lot of perspiration, a few curse words here and there, and encouragement from @MrBill, but my approximately 80 Zwave devices as well as a few wifi devices are now all on IoP, and so far so good. About 75 % of the Zwave devices were easy to exclude from ISY and then include in IoP but quite a few needed to be taken out of their switch box and then do the exclusion/inclusion near the ISY and IoP. In some cases I actually brought the ISY near the device, using a Google Nest Wifi pod to connect the ISY to the network. A few devices refused either the exclusion or the inclusion and then I had to simple replace the device with spare ones that I had. There are 2 or 3 devices that work but show some communication errors. I did the "Update Neighbors" with most devices, but I believe that the mesh network will learn the best route over time. Now waiting for Eisy and then definitely I count on Michel to give us a migration tool Thanks again to Michel & Team, as well as to all of you who have given me guidance all this time. I am sure that I will continue to seek your help as needed ! 7
Recommended Posts