pablohoney Posted January 8, 2023 Share Posted January 8, 2023 Migrating from the ELK module to PG3 ELK NS with the Notification NS. Can the Zone Logical Status be mapped for Notifications with the ELK NS? Previously with the ELK module using ${elk.zone.3.status} provided Logical Status (Normal and Violated) in the notification. With the ELK NS using ${sys.node.n013_zone_3.status} as shown in the READE.md it only returns a value of "status" for the value in the notification. Changing to ${sys.node.n013_zone_3.ST} returns the raw value of 0 for Normal and 2 for Violated in the notification. For outputs using ${sys.node.n013_output_8.ST} returns the status with a value of Off or On in the notification. Link to comment
Solution Jimbo.Automates Posted January 8, 2023 Solution Share Posted January 8, 2023 The doc: https://github.com/UniversalDevicesInc-PG3/udi-poly-ELK/blob/master/README.md#zone-node Shows Logical Status driver:ST If it's still showing the raw value try rebooting the ISY. It returns the correct for output because that uses a standard On/Off so a reboot is not required. Link to comment
pablohoney Posted January 8, 2023 Author Share Posted January 8, 2023 Perfect, rebooting the ISY resolved it. Thanks for the quick reply! 1 Link to comment
Recommended Posts