hbdude Posted January 9, 2023 Share Posted January 9, 2023 I have installed my new eisy. I did not try to import my old programming. I wanted to start out fresh. I have a scene that turns on several switches. I turn this scene on with a program and it turns on the switches in the scene one switch that is not in the scene. I am wondering if I can find out what is turning this switch on Link to comment
Solution MrBill Posted January 9, 2023 Solution Share Posted January 9, 2023 For all the switches in the scene and the one that's not right click them in the device tree and choose "Restore Device", do them one at a time and wait until the ISY is finished before moving on to the next. When you started out fresh did you do it by factory resetting the PLM and each device then adding it to the eisy? Link to comment
hbdude Posted January 9, 2023 Author Share Posted January 9, 2023 No I used my old PLM. Just unplugged it from my ISY-994 and plugged it into the Eisy. That fixed it. Is there any reason to factory reset the PLM? Thanks for your help Link to comment
hbdude Posted January 9, 2023 Author Share Posted January 9, 2023 Restore device fixed it. Link to comment
Recommended Posts