IoX Release v5.5.5 - OUTDATED

* IoX = ISY on Anything.

Welcome to ZMatter Z-Wave+ Beta v5.5.5 !

Features

• Z-Wave Network Heal
• Option to set communication speed (for supporting older Z-Wave devices)
• Rewrite all links (associations)
• X-Ray for all node types

Bug Fixes

• Associations and Scenes Links (Fixes issues with scenes and many status reports from devices)
• Some Binary Sensors not reporting status
• Green icons indicating pending writes to the device
• Node address conflicts for Alarm / Alarm Sensor / Binary Sensor
• ZEN34 / ZEN17 / ZEN16 / ZSE42 supported
• Central Scene Controller nodes missing in some cases
• Insteon/X10: Not decoding X10 responses correctly

Getting Started

• Make a backup of Polisy (Admin Console | File | Backup IoX )
• Launch the Admin Console, go to the Configuration tab, click on Update Packages. Warning, this might take a while depending on how current your OS is
• Once completed (4 beeps + 1), unplug Polisy
• If you are using INSTEON, make sure the PLM is connected
• Power up your Polisy note that initial boot might take a much longer time than normal because udx might want to install missing packages to assist with migration (in the future)
• Once boot up is complete, Launch Admin Console

Migrating to ZMatter Z-Wave+

• Here are the instructions for migrating your Z-Wave network from ISY-994 or Polisy/Eisy to ZMatter Z-Wave+
  •   https://wiki.universal-devices.com/index.php?title=Eisy:User_Guide#Migration

Here are the installation instructions for those of you with a ZMatter Z-Wave board (not USB dongle):

• ZMatter-Assembly- Instructions.pdf (universal-devices.com).
•  Ensure that the antennas are connected in the proper location (Z-Wave = yellow band, on the left. Zigbee = red band, on the right)