Kelly Styles Posted February 13, 2023 Share Posted February 13, 2023 I updated my ISY from 5.3.0 to 5.34. Now it only boots in safe mode. I don't use Insteon (All Z-wave), so no PLM. I have a good backup, but that doesn't help. I even did Factory reset, and it remain 5.3.4 and looks for PLM. Link to comment
Solution Techman Posted February 13, 2023 Solution Share Posted February 13, 2023 (edited) There are two versions of the firmware, one for the PLM and one if you're not using a PLM. The reason it boots up in safe mode is because it's looking for the PLM. You need to Install the Z-wave only version of the firmware. Download firmware - ISY 994i Series including Z-Wave support - ISY 994i ZW, Z, or ZS Series (Z-Wave/Zigbee and/or if you do NOT have a PLM) Edited February 13, 2023 by Techman Link to comment
Kelly Styles Posted February 13, 2023 Author Share Posted February 13, 2023 Thank you Techman!!! That was the answer! 1 Link to comment
Recommended Posts