Jump to content

eISY admin console and PG3x confi in sync


hart2hart

Recommended Posts

I reinstalled Virtual nodeserver and the nodeserver did not retain the config including nodes and config.  

The 5 virtual switch devices I created still exist in the admin console, but they are not listed in the nodeserver custom configuration parameters or as nodes.  I'm thinking I need to add them back on the nodeserver side.  Is that correct and is there a way to keep what is in admin console and nodeserver synchronized?

Link to comment

If you selected re-install to the existing slot, it does not touch the custom parameters so any that were previously entered will remain.**

If you delete the node server and then install, it will delete the custom parameters and you will have to re-enter them.

 

** This is somewhat dependent on the node server as it could clear them all at startup if that was part of it's startup process.

Link to comment
If you selected re-install to the existing slot, it does not touch the custom parameters so any that were previously entered will remain.**
If you delete the node server and then install, it will delete the custom parameters and you will have to re-enter them.
 
** This is somewhat dependent on the node server as it could clear them all at startup if that was part of it's startup process.

Thanks. I got interrupted during migration from pg3 to PG3x including the portal migration. Im 99.99% I did something wrong or out of order. I had to reinstall all nodeservers in their same slot and enter various parameters. They all worked except for this one.

It was odd how you config it and I can’t recall even the basics. I’m fine to recreate the 5 virtual switches but I don’t remember how it works and can’t find an example. I usually put this stuff in a document for future reference. But not for this or I can’t find it. Looking at its config screen again, there appears to be a missing section at the bottom. There is a header and then save button but no add another parameter button for that section.
  • Like 1
Link to comment
Guest
This topic is now closed to further replies.

×
×
  • Create New...